UBS Key
PDA-5006KE Operating Instructions
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model
properly. After you have finished reading the instructions, put them away in a safe place for futuer
reference.
¶
Microsoft
®
Windows
®
, Windows
®
XP, Window
®
2000 Professional, and Internet Explorer
are registered brand names or brand names of Microsoft Corporation of the United States in
the United States and in other countries.
¶
Adobe
®
Reader
®
is a registered brand name or brand name of Adobe System Incorporated.
¶
Intel
®
Pentium
®
is a registered brand name or brand name of Intel Corporation.
¶
Other company names and product names in this Operating Instructions are registered
brand names or brand names of the companies mentioned.
English
Safety Precautions
D3-4-2-1-1_En-A
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
Operating Environment
Operating environment temperature and humidity:
0 ºC – +40 ºC (+32 ºF – +104 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c_A_En
[For U.S. model]
IMPORTANT NOTICE
– THE SERIAL NUMBER FOR THIS DEVICE IS LOCATED NEAR THE USB CONNECTOR.
PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A
SECURE AREA. THIS IS FOR YOUR SECURITY.
D1-4-2-6-1_En
Information to User
Alteration or modifications carried out without appropriate
authorization may invalidate the user’s right to operate the
equipment.
D8-10-2_En
[For Canadian model]
This Class B digital apparatus complies with Canadian
ICES-003.
This product complies with the Low Voltage Directive
(73/23/EEC, amended by 93/68/EEC), EMC Directives
(89/336/EEC, amended by 92/31/EEC and
93/68/EEC).
D3-4-2-1-9a_En
Note for Dealers:
After installation, be sure to deliver this manual
to the customer and explain to the customer
how to handle the product.
Safety warnings
¶
How to use
Never place any metal objects or easily
combustible objects in the connector of the
USB Key, as doing so could result in
damage to the product.
¶
Never leave the product within the reach of
infants or small children, as doing so might
result in the infant or child swallowing the
device and result in asphyxiation. If an
infant or child seems to have swallowed
the device, consult a physician immediately
for assistance.
Warning
Caution
Scope of liability
¶
Pioneer may not be held in any way
responsible for any damage resulting from
a failure to follow the instructions provided
in this operating instructions.
¶
Pioneer may not be held in any way
responsible for the loss or alteration of
data, interruptions in business operations,
or any other secondary damage occurring
as a result of the use of this USB key or the
failure of the product to operate properly.
¶
Pioneer may not be held in any way
responsible for any damages occurring as a
result of the use of this product due to
fires, earthquakes, flooding or other natural
disasters nor any damage occurring as the
result of the actions of any third parties or
any other accidents, including any
deliberate actions or mistakes on the part
of the user or the use of this product for
any purposes other than its intended
purpose.
¶
Pioneer may not be held in any way
responsible for any damage occurring as a
result of improper operation or other
problems occurring as a result of the use of
this product with any products not
designed or manufactured by Pioneer.
¶
Pioneer may not be held in any way
responsible for the loss or destruction of
data in the use of this product no matter
what the cause of the problem or the
nature and degree of damages.
¶
Pioneer may not be held in any way
responsible for any indirect damages,
secondary damages, special damages, or
other damages resulting from the use of
the product or the inability to use the
product (such damages include but are not
limited to the loss of data, damage of
reputation, leakage of data, loss of profit, or
interruption of business operations) even if
the company is informed of the possibility
of any such damage occurring.
¶
The use of this product may cause changes
to occur in computer network settings, but
Pioneer cannot be held responsible for
restoring any such network settings to their
original state.
PDA-5006KE (USB key) is designed to automatically perform communications directly with
NetPlasma (Adhoc). Also see the operating instructions provided with the PDA-5005NW card
(network display card).
÷
PDA-5006KE (USB Key) Operating Instructions ...... this document
The following manuals are included with the USB key in PDF file.
÷
Operating_Instructions
(Operating Instructions for Connection, Operation, and Adjustment of the Plasma Display)
÷
Using_NetPlasma
÷
NetPlasma_Operating_Instructions_for_Administrator
You need Adobe
®
Reader
®
to read a PDF file.
Configuration of the Operating Instructions
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filed
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
or moisture.
D3-4-2-1-3_A_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_En
WARNING
To prevent a fire hazard, do not place any naked
flame sources (such as a lighted candle) on the
equipment.
D3-4-2-1-7a_A_En
WARNING:
Handling the cord on this product or
cords associated with accessories sold with the
product will expose you to lead, a chemical known to
the State of California and other governmental
entities to cause cancer and birth defects or other
reproductive harm.
D36-P4_En
Wash hands after handling
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the
unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and
televisions, use shielded cables and connectors for connections.
D8-10-3a_En
FEDERAL COMMUNICATIONS COMMISSION
DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions; (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Product Name: USB KEY
Model Number: PDA-5006KE
Product Category: Class B Personal Computer & Peripherals
Responsible Party Name: PIONEER ELECTRONICS SERVICE, INC.
Address: 1925 East, Dominguez, Street, Long Beach, CA90801-1760, USA
Phone: 310-952-2915
URL: http://PioneerUSA.com
Using the USB Key
The USB Key is used in the following three ways. Remove the cap of the USB Key and insert it
into the USB connector (Connect it to the USB1.1 or the USB2.0 port).
7
Reading files in the USB Key
Use a personal computer with Microsoft Windows 2000 or higher installed as its operating
system.
7
Using it as a network key
Use it to connect to a personal computer without NetPlasma registration.
A personal computer without registration must already have a wireless LAN environment.
NetPlasma must be used to write wireless settings in advance. For detailed information, speak
to your system administrator or read the “NetPlasma Operating instructions for Administrator”.
Recommended personal computer specifications
1
Insert the USB Key into the USB connector of the personal computer you want to
connect to.
2
Operate it according to instructions on the NetPlasma Connector screen that is
displayed on the personal computer.
3
Be sure to exit from NetPlasma Connector after use. (Settings will automatically
return to their defaults.)
4
Always be sure to follow the instructions on “Removing the USB key” when
removing the USB key.
Names of parts and LED display
LED display
Lit green:
Indicates that USB key is connected to
personal computer.
Flashing green:
Indicates that data is being read,
written or copied from computer.
Prohibition
Never remove USB key while LED is flashing. Doing so may result in improper computer
operation or in loss or damage to data or USB key.
¶
Bringing the USB key into a cold, unheated
room or raising the temperature of the
room rapidly could cause condensation to
form in the product. This could not only
cause the product to perform improperly
but could also result in damage to the
product. If this happens, leave the product
unused until the condensation dries and
raise the temperature of the room gradually
before use.
¶
Never subject the device to shocks or
vibrations or remove the USB key while
data is being read or written.
¶
Never turn off the power to your computer
while data is being read from or written to
the USB key. Doing so could result in the
loss or damage of internal data.
¶
Always be sure that there is no data (i.e.,
files) on the USB key before performing an
initialization. Failing to do so could result in
the loss of data.
¶
Performing any of the following operations
while the USB key is connected to your
computer could result in it failing to operate
properly: startup, restart, or recovery from
standby or sleep mode.
PDA-5006KE
Cap
LED
USB connector
CPU
Intel
®
Pentium
®
III
Processor 800MHz or higher
RAM memory
256MB or more
HDD
Unused capacity of 20MB or more
USB connector
USB 1.1 or USB 2.0
Operating system
• Microsoft
®
Windows
®
XP Professional Edition (Service Pack 1 or Service Pack 1a)
Browser
• Microsoft Internet Explorer 6.0 or higher
