Pioneer P8880BT/BR Service Manual Download Page 7

Page: 7 / 114

DEH-P75BT/XN/EW5

CAUTION

Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type recommended by the manufacture.
Discord used batteries according to the manufacture's instructions.

Service Precaution

1. You should conform to the regulations governing

the product (safety, radio and noise, and other

regulations), and should keep the safety during

servicing by following the safety instructions

described in this manual.

2. Before disassembling the unit, be sure to turn off

the power. Unplugging and plugging the connectors

during power-on mode may damage the ICs inside

the

unit.

3. To protect the pickup unit from electrostatic discharge

during servicing, take an appropriate treatment

(shorting-solder) by referring to "the DISASSEMBLY".

4. After replacing the pickup unit, be sure to check the
grating.
5. Be careful in handling ICs. Some ICs such as MOS

type are so fragile that they can be damaged by

electrostatic induction.

Summary of Contents for P8880BT/BR



















































































































Search results

Summary of Contents for P8880BT/BR

Reviews:

Related manuals for P8880BT/BR

Brands by name

Popular brands

Pioneer P8880BT/BR, Service Manual

Search results

Summary of Contents for P8880BT/BR

Reviews:

Related manuals for P8880BT/BR

Brands by name

Popular brands