Pioneer MVH-S512BS Operation Manual Download Page 38

Page: 38 / 58

X:\print\Pioneer\19_DEH\UC\19_865UC_QRI3108(A6_Vertical)\020Chapter_EN.f

MVH-S512BS

19_865UC_QRI3108(A6_Vertical)

- 38 -

En
g

lis

Pandora

ERROR-19

→

Communication failed.
– Disconnect the cable from the device.

Once the device’s main menu is
displayed, reconnect the device and
reset it.

NOT FOUND

→

The Pandora application has not started
running yet.
– Start up the Pandora application.

RATING ERROR

→

The thumb rating operation was
disabled.
– Run the same command for another

track.

CAN'T SKIP

→

The skip operation was disabled.
– Run the same command for another

track.

THUMB ERROR

→

Unable to save thumb rating.
– Try again later.

BOOKMARK ERR

→

Unable to save BookMark.
– Try again later.

INOPERABLE

→

The operation to save BookMark or add
station was disabled.
– Run the same command for another

track.

UNABLE TO ADD

→

Unable to add station.
– Try again later.

SKIP LIMIT

→

Due to music licensing restrictions,
Pandora limits the total number of skips
per hour.

– Wait until Pandora allows you to skip

again.

UPDATE APP

→

This version of the Pandora application
is not supported.
– Connect a device that has a

compatible version of the Pandora
application installed.

LOG IN ERROR

→

Your Pandora account is not logged in.
– Disconnect the cable from the device,

and log in to your Pandora account.
Then reconnect the device.

ERROR

→

Device error message displayed in the
Pandora application.
– Check the connected device.

→

Pandora system is undergoing
maintenance.
– Try again later.

NO STATIONS

→

No station found.
– Create a station in the Pandora

application on your connected device.

NO BT DEVICE GO TO BT MENU TO
REGISTER

→

No Bluetooth device found.
– Connect the unit and the device via

Bluetooth (page 10).

CONN. FAILED PRESS BAND KEY TO
RETRY

→

Bluetooth connection failed.
– Press

BAND

to make a

connection again.

CHECK APP PRESS BAND KEY TO RETRY

→

Connection to the Pandora application
failed.
– Press

BAND

to make a

connection again.

Summary of Contents for MVH-S512BS


























































Search results

Summary of Contents for MVH-S512BS

Reviews:

Related manuals for MVH-S512BS

Brands by name

Popular brands

Pioneer MVH-S512BS, Operation Manual

Search results

Summary of Contents for MVH-S512BS

Reviews:

Related manuals for MVH-S512BS

Brands by name

Popular brands