AUDIO settings
18
C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
MVH-X300BT/MVH-X700BT/MVH-S315BT
19_812_813ME_QRI3105(B6_Horizon)
En
Menu Item
Description
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL],
[CUSTOM1], [CUSTOM2],
[FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band:
[50HZ] to
[12.5kHZ]
Equalizer level:
[–6] to [+6]
Select or customize the equalizer curve.
•
When you select a setting other than
[CUSTOM1] and [CUSTOM2], you can also
customize the equalizer curve by pressing
and holding the
M.C.
dial, then store the
customized equalizer curve in
[CUSTOM1].
FADER
*1
Adjust the front and rear speaker balance.
BALANCE
Adjust the left and right speaker balance.
SUBWOOFER
[ON], [OFF]
Set to [ON] when using a subwoofer
speaker.
SUBWOOFER
*2
[NOR], [REV]
Select the subwoofer phase.
SPEAKER LEVEL
Types of speaker:
[FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Output level:
[–24] to [10]
Select a speaker unit (filter) and adjust the
output level.
•
Each value you have adjusted changes
when you change the [POSITION] setting
(page
18).
CROSSOVER
Select a speaker unit (filter) to adjust the
HPF or LPF cut-off frequency and the slope
for each speaker unit.
For details on the [CROSSOVER] setting, see
page
16.
POSITION
[OFF], [FRONT LEFT] (front
seat left), [FRONT RIGHT]
(front seat right), [FRONT]
(front seats), [ALL]
Select a listening position to adjust the
speakers' output levels automatically and
add a delay time that corresponds to the
number and locations of occupied seats.
TIME ALGNMNT
[INITIAL], [OFF], [CUSTOM]
Select a type of speaker and
adjust the speaker distance
for further customizing in
[CUSTOM].
Types of speaker:
[FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Speaker distance (cm):
[350]
to [0.0]
Select or customize the time alignment
settings to reflect the distance between the
listener’s position and each speaker.
•
Select [INITIAL] to initialize the setting
value.
•
Select [OFF] to reset all setting values to
0.
•
The [CUSTOM] setting is available when
[FRONT LEFT] or [FRONT RIGHT] is
selected in [POSITION] (page
•
The [CUSTOM] setting is not available
when [OFF] is selected in [SUBWOOFER]
(page
18).
SAVE SETTINGS
[YES], [NO]
Save to later recall the following sound
settings at their current values:
[CROSSOVER], [SPEAKER LEVEL], [EQ
SETTING], [POSITION], [TIME ALGNMNT],
[D.BASS], [SUBWOOFER].
Menu Item
Description
PioneerTest.book Page 18 Friday, March 16, 2018 4:39 PM
