Pioneer MVH-7300, Operation Manual

Page: 25 / 52

Note
When the USB or SD source is selected, this unit
cannot view still images on USB/SD as a
slideshow.
Bluetooth Telephone
This function is available only for MVH-8300BT .
For details on basic operations after connect-
ing to a cellular phone, refer to
Using Blue-
tooth telephone on page 11.
!
PIN code is set to
0000
as the default. You
can change this code. Refer to
PIN Code
(PIN code input) on the next page.
Connection menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1 Display the phone menu.
Refer to Basic menu operations on page 9.
2 Use M.C. to select Connection.
Turn to change the menu option. Press to se-
lect.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Device List (connecting or disconnecting a cellular
phone from the device list)
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the name of a device you want
to connect.
3
Press and hold M.C. to switch the Bluetooth de-
vice address and device name.
4
Press M.C. to connect the selected cellular
phone.
While connecting, the circular indicator flashes.
To complete the connection, check the device
name (
MVH-8300BT
) and enter the PIN code on
your cellular phone. If the connection is estab-
lished, a circular indicator appears next to the de-
vice name.
Delete Device (deleting a cellular phone from the de-
vice list)
En
25
Section
03
Operating
this
unit
Operating this unit