Pioneer KEH-P4022, Operation Manual

Page: 17 / 40

Initial Settings Other Functions
En 16
Note
• If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune in
the stations with manual tuning or use seek
tuning again.
Setting the AM tuning step
The AM tuning step can be switched between 9
kHz, the preset step, and 10 kHz. When using
the tuner in North, Central or South America,
reset the tuning step from 9 kHz (531 – 1,602
kHz allowable) to 10 kHz (530 – 1,640 kHz allow-
able).
1 Press
AUDIO
to select
AM STEP
.
Press
AUDIO
repeatedly until
AM 9
appears in
the display.
2 Select the
AM
tuning step with
2
/
3
.
Pressing
2
/
3
will switch the AM tuning step
between 9 kHz and 10 kHz. The selected AM
tuning step will appear in the display.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using external equipment connected to this
unit.
1 Press
AUDIO
to select
AUX
.
Press
AUDIO
repeatedly until
AUX
appears in
the display.
2 Select
AUX
on or off with
5
/
∞
.
Pressing
5
/
∞
will switch
AUX
between on and
off and that status will be displayed.
Setting the time display on or off
You can turn the time display on even when the
sources are off.
Press
CLOCK
to select the time display.
Each press of
CLOCK
turns time display on or
off.
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 25 seconds.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner‘s manual.
Selecting AUX as the source
Press
SOURCE
to select
AUX
as the source.
Press
SOURCE
until
AUX
appears in the display.
• If the auxiliary setting is not switched on,
AUX
cannot be selected. For more details, see
Switching the auxiliary setting on this page.
English
Español
Deutsch
F
rançais
Italiano
Nederlands