Pioneer KEH-P4020 - Radio / Cassette Player, Service Manual

Page: 44 / 47

44
Listening to the radio
1
BAND
indicator
Shows which band the radio is tuned to, AM or FM.
2
FREQUENCY
indicator
Shows to which frequency the tuner is tuned.
3
PRESET NUMBER
indicator
Shows what preset has been selected.
4
STEREO
(

) indicator
Shows that the frequency selected is being broadcast in stereo.
1
Press
SOURCE
to select the tuner
.
2
U
se
VOLUME
to adjust the sound level.
When you press
VOLUME
up/+, the volume is
raised and when pressed down/–, the vol- ume is lowered. 3
Press
BAND
to select a band
.
Press
BAND
until the desired band is dis-
played,
F1
,
F2
,
F3
for FM or
AM
.
4
T
o perform manual tuning, press
2
or
3
with quick presses. The frequencies move up or down step by step. 5
T
o perform seek tuning, press and hold
2
or
3
for about one second and release.
The tuner will scan the frequencies until a broadcast strong enough for good reception is found. •
Y
ou can cancel seek tuning by pressing
either
2
or
3
with a quick press.
•
If you press and hold
2
or
3
you can skip
broadcasting stations. Seek tuning star
ts as
soon as you release the buttons.
Note
•
When the frequency selected is being broadcast in stereo the
STEREO (

)
indica-
tor will light.
2
1
3
4
Playing a T
ape
1
T
APE
DIRECTION
indicator
Shows the direction of the tape trans- port.
2
PLA
Y TIME
indicator
Shows the elapsed playing time of the current track.
1
P
ress
OPEN to open the front panel.
Cassette loading slot appears. 2
Insert a cassette tape into the cassette
loading slot. Playback will automatically start.
Cassette loading slot
T
APE EJECT
button
•
Y
ou can eject a cassette tape by pressing
T
APE EJECT
.
3
Close the front panel.
•
After a cassette tape has been inserted, press
SOURCE
to select the Cassette
player
.
4
Use
VOLUME
to adjust the sound level.
When you press
VOLUME
up/+, the volume is
raised and when pressed down/–, the vol- ume is lowered. 5
T
o perform fast forward or rewind, press
2
or
3
.
FF
or
REW
appears in the display
.
•
T
o cancel fast forward or rewind and
return to playback, press
BAND
.
•
Y
ou can cancel fast forward or rewind by
pressing
2
or
3
in the same direction twice.
6
T
o perform forward or rewind music
search, press
2
or
3
twice.
F-MS
(forward music search) or
R-MS
(rewind music search) appears in the dis- play
. The cassette player will fast forward or
rewind to the next or previous blank spot on the tape and begin to play
.
•
T
o cancel music search and return to play-
back, press
BAND
.
•
Y
ou can cancel music search by pressing
2
or
3
in the same direction again.
7
T
o change the direction of the tape trans-
port, press
BAND
.
Notes
•
Do not insert anything other than a cas- sette tape into the cassette loading slot.
•
PLA
Y TIME
indicator starts from
00’00”
in
the following cases: —
When a tape is inserted
—
When the tape direction is changed
—
When you rewind the tape to the begin- ning
•
PLA
Y TIME
indicator is halted when fast
forward, rewind or music search is operat- ing.
1
2