Multi-CD Player
Audio Adjustments
1 Select the repeat range.
Refer to
Repeating play
on page 14.
2 Press and hold
PAUSE/SCAN for about two
seconds
to turn scan play on.
DSCN
(scanning tracks) or
SCAN
(scanning
discs) appears in the display. The first 10 sec-
onds of each track of the present disc (or the
first track of each disc) is played.
3 When you find the desired track (or disc)
press and hold
PAUSE/SCAN for about two sec-
onds
to turn scan play off.
The track (or disc) will continue to play.
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press
PAUSE/SCAN
to turn pause on.
PAUSE
appears in the display. Play of the cur-
rent track pauses.
2 Press
PAUSE/SCAN
to turn pause off.
Play will resume at the same point that you
turned pause on.
Introduction of audio
adjustments
1
AUDIO
display
Shows the audio adjustments status.
2
LOUD
indicator
Appears in the display when loudness is
turned on.
Press
AUDIO
to display the audio function
names.
Press
AUDIO
repeatedly to switch between the
following audio functions:
FAD
(balance adjustment)—
EQ-L
(equalizer)—
LOUD
(loudness)—
FIE
(front image
enhancer)—
SLA
(source level adjustment)
• When selecting the FM tuner as the source,
you cannot switch to
SLA
.
• To return to the display of each source, press
BAND
.
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
1
2
En
15
