Pioneer KEH-M1096ZT/X1B/EW, Service Manual

Page: 36 / 46

36
KEH-M1096ZT
DOLBY B NR ADJUSTMENT
No. Test Tape Adjustment Point Adjustment Method
(Switch Position)
1 ACT-150 VR301(Lch),VR302(Rch) mV Meter(2) : –6dBs±1dB
(400Hz,200nwb/m) (DOLBY NR Switch : OFF)
FM ADJUSTMENT
Modulation M:MONO MOD., 400Hz 30%(22.5kHz Dev.) or 400Hz 100%(75kHz Dev.)
S:STEREO MOD., 1kHz, L or R=30%(20.25kHz+7.5kHz Dev.)
NOTE:Before proceeding to further adjustments after switching power ON, let the tuner run for ten minutes to allow
the circuits to stabilize.
FM SSG Displayed Adjustment Adjustment Method
No.
Frequency(MHz)
Level(dBf)
Frequency(MHz)
Point (Switch Position)
TUN Volt
1 ••••• ••••• 108.0 L5 DC V Meter(1) : 6V
IF 2 98.1 M 60
—
100 98.1 T51 Center Meter : 0
ANT Coil
3 98.1 M 5 98.1 L2 mV Meter(1) : Maximum
RF Coil
4 98.1 M 5 98.1 L4 mV Meter(1) : Maximum
RF 5 129.3 M 60
—
80 107.9 TC1 mV Meter(1) : Minimum
Trimmer
6 RF Coil and RF Trimmer shall be adjusted twice or more
IFT 7 98.1 M 5 98.1 T31 mV Meter(1) : Maximum
(STEREO MODE)
ARC 8 98.1 S 40 98.1 VR154 mV Meter(1) : Separation 5dB
(STEREO MODE)
RDS SL ADJUSTMENT
FM SSG Displayed Adjustment Adjustment Method
No.
Frequency(MHz)
Level(dBf)
Frequency(MHz)
Point (Switch Position)
1 104.0 S2 35 104.0 VR651 DC V Meter(2) : 1.75V+0.05V,-0.35V