background image

1

HTP102-SW

Service

Manual

ORDER NO.

PET98005

PIONEER ELECTRONIC CORPORATION

   4-1,  Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS SERVICE, INC.   P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER  ELECTRONIC  (EUROPE) N.V.   Haven 1087,  Keetberglaan 1 B-9120  Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.   501 Orchard Road, #10-00, Wheelock Place, Singapore 238880

©PIONEER ELECTRONIC CORPORATION 1998

                                                                   1998 Printed in U.S.A.

Place unit upside-down on a soft cloth so as not to scratch the
top panel.

The woofer is attached to the baffle by 4 screws.  To detach the
woofer, unfasten those screws and lift up.  Detach the speaker
wires by gently pulling the connectors off the speakers’ binding
posts.  When attaching the woofer, push the connectors on to
the binding posts and attach the speaker to the baffle by
tightening the screws.

•  

Once the woofer has been removed, the terminal cup may be

removed by unfastening the six screws that fasten it to the
backboard.  Note: Do not pull on wires at the terminal side if
not disconnected from the woofer as this may result in damage
to the binding posts, wires, or connectors.  To attach, re-fasten
the screws on to the backboard making certain that the text on
the terminal cup is oriented in the correct direction.

The cosmetic duct is attached to the cabinet by application of
adhesives.  To detach, first remove woofer as described above.
From within the cabinet, rock the port tube back and forth until
the assembly comes loose.  To attach, press-fit the inside and
outside port rings on to the port tube and apply hot melt
adhesive around the circumference of outside port ring and
press fit on to the front board.

 The foot may be detached by removing one external screw.  To
attach, refasten foot with screw.

HOW TO REASSEMBLE AND
DISASSEMBLE

65S

This service manual is intended for qualified service technicians; it is not
meant for the casual do-it- your selfer. Qualified technicians have the
necessary test equipment and tools, and have been trained to properly and
safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability
of the product and may void the warranty. If you are not qualified to
perform the repair of this product properly and safely, you should not risk
trying to do so and refer the repair to a qualified service technician.

WARNING

THIS  PRODUCT  CONTAINS  LEAD  IN  SOLDER  AND  CERTAIN
ELECTRICAL  PARTS CONTAIN  CHEMICALS  WHICH  ARE
KNOWN  TO  THE  STATE  OF CALIFORNIA  TO CAUSE  CANCER,
BIRTH  DEFECTS  OR  OTHER  REPRODUCTIVE HARM.

Health & Safety Code Section 25249.6 - Proposition 65

SPEAKER SYSTEM

HTP102-SW

Reviews: