Pioneer HDJ-2000, Service Manual

Page: 3 / 4

3
HDJ-2000
5
6 7 8
5 6
7
8
C
D
F
A
B
E
1 1..SP Unit ASSY L WXX1386
NSP 2..Speaker WWW1089
NSP 2..Base L WNK2902
NSP 2..Dumper WER1142
2 1..SP Unit ASSY R WXX1387
NSP 2..Speaker WWW1089
NSP 2..Base R WNK2903
NSP 2..Dumper WER1142
3 1..Switch Board ASSY WXX1388
NSP 4 2..Switch WSH1022
NSP 5 2..PC Board WNP1079
NSP 6 2..Resistance RS1PMF4R7
7 1..Case ASSY L WXX1389
NSP 2..Ring L WNA1168
NSP 2..Case L WNK2904
NSP 2..Switch Label WAN1096
8 1..Case R ASSY WXX1390
NSP 2..Ring R WNA1169
NSP 2..Case R WNK2905
NSP 9 Cord WDC1087
NSP 10 Cord WDC1089
11 - - - - - - - - - - - - - - - -
12 Jack WKN1025
13 - - - - - - - - - - - - - - - -
14 Shaft WLA1034
15 Plug Holder WNA1167
16 Stopper Ring WNA1170
17 Cap L WNH1006
18 Cap R WNH1007
19 Stopper A WNH1008
20 Stopper B WNH1009
21 Joint L WNH1010
22 Joint R WNH1011
23 Hanger L WNH1012
24 Hanger R WNH1013
25 Case Holder WNH1014
26 Slider WNK2892
27 Slider Cover WNK2893
28 Inner Slider A WNK2894
29 Inner Slider B WNK2895
30 Cap Cover WNK2896
31 Hanger Cover L WNK2897
32 Hanger Cover R WNK2898
33 Click Plate WNK2899
34 Knob WNK2900
35 Knob Holder WNK2901
36 Click Shaft WNK2906
37 Clamper Cover WNK2907
38 Clamper WNK2908
39 1..Head Band WNK2909
NSP 2..Cord WDC1088
NSP 2..Bandplate WNA1166
40 Hanger Cap WNK2938
41 Ear Pad WNV1142
42 Head Band Cushion WNV1144
43 Bolt WBA1012
44 Spring WBH1057
45 Spring WBH1058
46 Spring L WBH1059
47 Spring R WBH1060
48 Plate Spring WBK1016
49 Steel Ball WET1027
50 Screw BMZ30P030FCC
51 Screw PMZ20P120FTB
52 Screw JFZ20P035FTB
53 Screw PPZ20P040FTB
54 Hexagon Socket Screw PPZ20P080FTB
55 Connector Screw PPZ30P060FTB
56 Screw BMZ30P040FTB
57 Washer WB30FTC
EXPLODED VIEWS Parts List
Mark No. Description Part No. Mark No. Description Part No.
Disassembly Procedures
To remove the spring , bend it as shown in
these photos.
How to disassemble the hanger cover
How to disassemble the case holder
Screw Hanger Cover L Screw Stopper A
Screw Washer Spring L
Stopper B Bolt Shaft Joint L Click Plate
Screw Clamper Cover Spring Click Shaft
Screw Clamper Connector Screw
After the bolt is
removed The shaft can be
easily removed if you
slide it by holding the
point shown in the
above photo pressed.
Note:
As both ends (the thicker parts)
of the shaft will serve as axes of
rotation, be careful NOT to
damage them. Some scratches
in the constricted middle part
may be tolerable.