HDJ-1500-K
5
5
6
7
8
5
6
7
8
C
D
F
A
B
E
Jack
Blue wire of the cord
from Speaker Assy L
Copper-colored wire of the
cord from Speaker Assy L
Red wire of the cord from
the headband
Copper-colored wire of the cord from
the headband
Solder each wire so that the end of each wire to be embedded in solder
faces inward and that the wires are laid inward, as shown in the photo.
Cord from Speaker
Assy L
Cord from the headband
Slightly bend the end
of the cord.
Pass the cord through the shaft,
with the cord bent into an L
shape.
Attach the shaft to the hole of the
stopper. While holding the shaft
down with one finger, attach the
cap cover to the cap.
Assembled state
Apply
grease
to the entire
inner circumference of the
wall of the hole at the center
of the stopper.
Apply
grease
to the collar
then place it in the cap.
Fit the stopper into the cap.
Apply
grease
to the
parts of the cap cover
indicated in the photo
above.
Attach the Cap Assy to
the inner slider.
[Assembly Procedure of the Cap Section (Procedure for Production)]
[Reference for Assembling]
Grease
(GEM1013)
[Wiring and Solder Positions of the Jack Board Assy]
