When connecting to two speakers
The output from two speakers is the same as
that of one speaker.
Speaker output
Connections when using
the speaker input wire
Connect the stereo speaker output wires to
the amplifier using the supplied speaker input
wire with RCA pin cord.
1
Stereo
2
Speaker output
3
Red: Right
+
4
Black: Right
*
5
Black: Left
*
6
White: Left
+
7
Speaker input wire with RCA pin cord
To the RCA input jack of this unit
Notes
!
If speaker input wires from a headunit are
connected to this amplifier, the amplifier will
automatically turn on when the headunit is
turned on. When the headunit is turned off,
the amplifier turns off automatically. This
function may not work with some headunits.
In such cases, please use a system remote
control wire (sold separately). If multiple am-
plifiers are to be connected together synchro-
nously, connect the head unit and all
amplifiers via the system remote control wire.
!
This amplifier automatically selects an input
signal mode between the RCA level and the
speaker level by detecting an input signal.
Solderless terminal
connections
!
Since the wire may become loose over
time, it must be periodically inspected and
tightened as necessary.
!
Do not solder or bind the ends of the
twisted wires.
!
Fasten while making sure to not to clamp
the insulating sheath of the wire.
!
Use the supplied hexagonal wrench to
tighten and loosen the terminal screw of
the amplifier and use it to securely fasten
the wire. Be careful to avoid excessive tigh-
tening of this screw, which may damage
the wire.
Connecting the power terminal
WARNING
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there is a risk of
overheating, malfunction and injury, including
minor burns.
En
Connecting the units
