Pioneer GM-3300T, Owner'S Manual

Page: 12 / 85

11
Specifications
Power source ........................................................................................................ 14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption .................................................................................................... 15.0 A (at continuous power, 4
Ω
)
Average current drawn* ........................................................................................................ 4.0 A (4
Ω
for two channels)
7.8 A (4
Ω
for one channel)
Fuse ........................................................................................................................................................................ 25 A
×
1
Dimensions ........................................................................................................ 300 mm (W)
×
60 mm (H)
×
194 mm (D)
Weight .................................................................................................................... 2.4 kg (Leads for wiring not included)
Maximum power output .............................................................................................. 120 W
×
2 (4
Ω
) / 300 W
×
1 (4
Ω
)
Continuous power output .......................................................... 60 W
×
2 (at 14.4 V, 4
Ω
, 20 Hz to 20 kHz 0.08% THD)
150 W
×
1 (at 14.4 V, 4
Ω
, 20 Hz to 20 kHz 0.8% THD)
75 W
×
2 (at 14.4 V, 2
Ω
, 20 Hz to 20 kHz 0.8% THD)
Load impedance ........................................................................................................................ 4
Ω
(2
Ω
to 8
Ω
allowable)
(Bridge connection: 4
Ω
to 8
Ω
allowable)
Frequency response .......................................................................................................... 10 Hz to 50 kHz (+0 dB, –1 dB)
Signal-to-noise ratio .................................................................................................................... 100 dB (IEC-A network)
Distortion ........................................................................................................................................ 0.008 % (10 W, 1 kHz)
Separation ...................................................................................................................................................... 70 dB (1 kHz)
Low pass filter .............................................................................................................................. Cut off frequency: 80 Hz
Cut off slope: –12 dB/oct
Gain control .................................................................................................................................... RCA: 400 mV to 6.5 V
Speaker: 1.6 V to 26 V
Maximum input level / impedance ...................................................................................................... RCA: 6.5 V / 22 k
Ω
Speaker: 26 V / 40 k
Ω
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.