manualshive.com logo in svg

Pioneer FX-MG9106ZT-91/ES, Service Manual

Share
Download
Pioneer FX-MG9106ZT-91/ES Service Manual Download Page 86

86

FX-MG9106ZT,M9106ZT-91

-

How to remove the Pickup unit

1. Remove the pulling spring, torsion spring and E-

shaped ring.  Then remove the Clamper arm.

* The spring (A) will be removed with the Clamper

arm.

10. Remove the screw, pressure spring and collar. Lift 

up the Carriage mechanism assy to remove it.

* Screw tightening torque: 2.6kgfcm

2. Slide the Clamp UP lever (B) to remove it.

3. Loosen the 2 screws.  Remove the feed-screw cover

by sliding it.

4. Remove the feed-screw pressure spring (D).

5. Loosen the 2 screws.  Remove the feed-screw holder

(E).

6. Remove the belt.

7. Remove the Pickup unit together with the feed screw.

* Be careful not to lose the shaft holders at the both

ends of the feed screw.

* Be careful not to damage the 2 flexible PCBs(for the

Pickup and motor) when separating them. The

flexible PCBs have been stuck each other with

double-sided adhesive tape.

Carriage
mechanism Assy

Screw

Collar

Pressure spring

Clamper arm

E-shaped ring

Pulling spring

Torsion spring

White

Black

Pickup 
unit

Feed screw

Belt

Carriage

motor

Fig.9

Fig.10

Fig.11

Summary of Contents for FX-MG9106ZT-91/ES





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands