manualshive.com logo in svg

Pioneer FX-MG8517ZT/UC, Service Manual

Share
Download
Pioneer FX-MG8517ZT/UC Service Manual Download Page 94

94

FX-MG8517ZT,MG8817ZT

-

How to remove the Tray Assy

1. Apply about 6V current to the Cam gear motor until

all holes match at the position (A) (elevation OK

position).

2. Hook the three springs B temporarily as shown in Fig.

6. While pushing the Tray holder lock arms (right and

left) in the direction (C), remove the Tray holder.

3. Lift up the Tray assy to remove it.

* Be careful not to remove the Tray hooks from the Tray 

assy.

ELV motor

Cam gear motor

Approximately DC 6V

Tray holder

Tray holder lock arm

Tray holder 
lock arm

Tray 
hooks

Tray Assy

Fig.9

Fig. 10

Tray 
hooks

Fig.8

-

Removing the Main Unit (Fig.8)

Straight the tabs at four locations indicated.

Remove the screw and then remove the Main

Unit.

-

Removing the Cassette Mechanism Module

(not shown)

1. Remove the four screws and then remove the

Cassette Mechanism Module.

Main Unit

Summary of Contents for FX-MG8517ZT/UC

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands