Pioneer FX-MG6096ZH, Service Manual

Page: 72 / 90

72
FX-MG6096ZH,FX-MG6096ZH2
(5) LCD Display Example
• While the setup is in progress
• The operation mode (PLAY, SEARCH, etc.) is identical
with the normal mode.
• When a protection/error has occurred
(a) Error display
Display can be switched
from the BAND key
(b) Display of occurrence No. and occurrence time
(in absolute time)
Min
11
Sec
11
Er–xx
Min
40
Sec
05
-
Error No. Display
The error mode is turned on if a CD player becomes not playable or is forced to halt due to an error. Cause(s) of an
error will be indicated with numerical characters. The error-number-display function is intended to facilitate the
error analysis and resulting repair work.
(1) Basic Display Means
• Display examples: Er-XX
(2) Error Code
Error code Category Troubles Description/Cause(s)
E1 Electricity Carriage home error Unable to move to or from inner perimeter
→
Failure on home switch or carriage move trouble.
E0 Electricity Focus search error Unable to set a focus
→
Scratches or stains on backside of the disc, severe vibrations,
CD-R is not written to the disc
(it can happen on the backside of the disc).
E0 Electricity Spindle lock error Spindle lock unavailable, sub-code unreadable
Sub-code error
→
Failure on spindle, scratches on the disc, stains or strong
vibrations.
E0 Electricity Mirror error MIRR signal error continues for 500 msec or more
→
Stains on the disc or strong vibrations.
E0 Electricity Setup error AGC protection cannot be turned on in time or focus can be easily lost
→
Scratches or stains on the disc or strong vibrations.
E0 Electricity Setup error Tracking error level is low or tracking balance adjustment is unavailable
→
Failure on the pickup or tracking-error circuit.
E0 Electricity Search time-out Target address can't be reached
→
Failure on the carriage/tracking or scratches on the disc.
E1 System Error on power supply Ground fault of power supply (VD)
→
Failure on switching transistor or failure of power supply.