Pioneer FX-MG6006ZH-05, Service Manual

Page: 92 / 96

92
1
2 3 4
1 2
3 4
F
E
D
C
B
A
FX-MG6006ZH-06/X1H/UC
FX-MG6006ZH-06/X1H/UC
FX-MG6006ZH-05/X1H/UC
BOSE AMP1
RELAY BOSE AMP2 +B
+B
SW+B
7.3 EXPLANATION
7.3.1 SYSTEM BLOCK DIAGRAM
7.3.2 OPERATIONAL FLOW CHART
-
ANTI-THEFT OPERATION SPECIFICATION
1. Connect power supply (Before input code Number)
(1) ANTI-THEFT LED is flashing when ACC OFF, +B ON or ACC ON, +B ON, POWER OFF.
(2) If press POWER SW after power supply (ACC and +B) was turned ON, wait for input ANTI-THEFT CODE
NUMBER. ("COdE" is flashing on the LCD.)
2. Input ANTI-THEFT CODE NUMBER
(1) Factory code No. (the key-code of five digits) in advance input.
(2) If input code Number agreed with factory code Number.
• ANTI-THEFT is canceled and BEEP.
(3) If input code Number disagreed with factory code Number.
• Error code indicate. Ex) 1st time "Err1", 2nd times "Err2"..........10th times "ErrE"
If input code Number disagreed with factory code Number at 10th times, any key functions are not possible
during 1 hour.
3. Reset
If input code Number disagreed with factory code Number at 10th times, it is initialized by power supply turned OFF
(ACC and +B).
Then power supply (ACC and +B POWER SW) are turned ON again, wait for input ANTI-THEFT CODE NUMBER.
(Please wait until stop the LED flashing.)