17
En
En
g
lis
h
*3 Not available when [FUL] is selected in [REAR-SP] in the INITIAL settings (page 7).
*4 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 7).
*5 Not available when [OFF] is selected in [SUB.W].
You can also access to these menus when the unit is turned off.
* Not available when [PANDORA] or [APP] is selected as the source.
SYSTEM settings
Menu Item
Description
CLOCK SET
Set the clock (page 6).
12H/24H
[12H], [24H]
Select the time notation.
INFO DISPLAY
Display the item on the sub information display.
Select from “SPEANA,” “LEVEL METER,” “SOURCE,”
“CLOCK,” and “OFF.”
AUX
[ON], [OFF]
Set to [ON] when using an auxiliary device
connected to the unit.
BT AUDIO
[ON], [OFF]
Set the Bluetooth signal on/off.
BT MEM CLEAR
[YES], [CANCEL]
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[CLEARED] appears when data is successfully
deleted.
BT VERSION
Displays the system version of the unit and the
Bluetooth module.
APP CONN. SET
*
[WIRED], [BLUETOOTH]
Select the appropriate connection method
according to your device.
ILLUMINATION settings
Menu Item
Description
COLOR
[KEY COLOR], [DISP COLOR],
[BOTH COLOR]
Select color for the keys/display of the unit from
12 preset colors, [SCAN] or [CUSTOM]*.
•
[SCAN]: Cycle through a variety of colors
automatically.
•
[CUSTOM]*:
1
Press and hold the M.C. dial until the color
setting display appears.
2
Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 10 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C. dial until the color setting display appears.
* The CUSTOM setting is only available for [KEY
COLOR] and [DISP COLOR].
DIM SETTING
[SYNC ILLUMI], [SYNC CLOCK],
[MANUAL]
Change the display brightness.
BRIGHTNESS
[1] to [10]
Change the display brightness.
The available setting ranges differ depending on
[DIM SETTING].
PHONE COLOR
(Not available for FH-X520UI)
[FLASHING]
Select the key color when a call is received.
Applies the color set by [KEY COLOR].
[FLASH FX1] to [FLASH FX6]
Cycle through a variety of colors automatically.
[OFF]
No change in key color made.