Pioneer ELITE VSX-LX304 Instruction Manual Download Page 85

Page: 85 / 180

≫

≫

≫

≫

≫

≫

Amazon Music

You can use the music distribution service provided by Amazon by registering

with Amazon Music. Register this unit by downloading the Pioneer Remote

App (available for iOS and Android™) to your mobile device, for example a

smartphone or tablet, and register from the Pioneer Remote App screen.

•

To play Amazon Music you need to have an Amazon account and to be a

member of Amazon Prime and Amazon Music Unlimited. For more information,

see the Amazon website.

Amazon Music is now available in several countries. If Amazon Music is not

available in your country, please visit https://music.amazon.com/ for more info.

Registering this unit with Amazon Music

•

Use the Pioneer Remote App to register to Amazon Music. Registration is not

possible using this unit.

Use the unit’s network settings to connect to your household network.

Use the mobile device to download the Pioneer Remote App.

Connect the mobile device to the same network as the unit.

The unit is automatically displayed when you start the Pioneer Remote App.

Tap the unit when displayed to select it.

5. Tap "NET" or "NETWORK" at the top of the Pioneer Remote App screen, and

after switching to the network screen, tap the "Amazon Music" icon to display

the Amazon Music login screen. (Depending on the model, the icon names

may be different.)

• If the login screen is not displayed, but rather a screen prompting

installation of Service Unlocker, then install that first.

Available services may differ depending on your area.

6. Enter the information required for the Amazon account, such as your email

address and password, to log into Amazon. The Amazon Music menu is

displayed when login is successful and this unit is registered.To continue to

start play, proceed to step 3 in the next section.

Playing Amazon Music

Start the Pioneer Remote App. This unit is displayed automatically when the

app is started, so tap the unit when displayed to select it.

Tap "NET" or "NETWORK" at the top of the screen, and after switching to the

network screen, tap the "Amazon Music" icon.

Select the content that you want to play in the menu screen for Amazon Music

and start play.

•

When playing Amazon Music with the remote controller, operate the input

selector on the remote controller to display the Network menu and select

"Amazon Music" from the menu.

Summary of Contents for ELITE VSX-LX304





















































































































































































Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands

Pioneer ELITE VSX-LX304, Instruction Manual

Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands