Basic playback
4
4
35
4
61
9
In this case, a passcode may be displayed on this receiver
and on the device equipped with
Bluetooth
wireless
technology. If this happens, check that the same passcode
is displayed on this receiver and the device equipped with
Bluetooth
wireless technology, then press
ENTER
. After
this, also perform the connection operation on the
Bluetooth
device to be connected. If the passcode does not
match the code displayed on the
Bluetooth
device to be
connected, press
RETURN
to cancel pairing, then try
starting over.
Press
BT
ADPT
to set the
ADAPTER
input, then conduct
the pairing operation on the
Bluetooth
wireless technology
device. If pairing is successful, there is no need to
performing the pairing operation below.
•
Pair one unit at a time.
•
When connecting this receiver by
Bluetooth
connections
with a device equipped with the
Bluetooth
function to listen
to music, do not connect any devices other than this
receiver by
Bluetooth
connection to the
Bluetooth
-equipped
device. If a
Bluetooth
connection is already established with
a device other than this receiver, disconnect the other
device before connecting this receiver.
1
Press
BT
ADPT
to switch the receiver to ADAPTER input.
2
Press
TOP MENU
to select Bluetooth Setup.
3
Use
/
to select PIN, then press
ENTER
.
4
Use
/
to select one of PIN codes 0000, 1234 or 8888,
then press
ENTER
.
You can use any of
0000
/
1234
/
8888
PIN codes.
Bluetooth
wireless technology device using any other PIN
code cannot be used with this system.
5
Switch on the
Bluetooth
wireless technology device
that you want to make pairing, place it near the system
and set it into the pairing mode.
6
Check to see that the
Bluetooth
ADAPTER is detected by
the
Bluetooth
wireless technology device.
When Bluetooth wireless technology device is connected:
Bluetooth
wireless technology device name appears in
the receiver display.
•
The system can display alphanumeric characters only.
Other characters may not be displayed correctly.
When Bluetooth wireless technology device is not
connected:
WAITING
appears in the receiver display. In this case,
perform the connection operation from the side of the
Bluetooth
wireless technology device.
7
From the
Bluetooth
wireless technology device list,
select
Bluetooth
ADAPTER and enter the PIN code
selected in the step 4.
•
PIN code may in some case be referred to as
PASSKEY.
Listening to Music Contents of
Bluetooth
wireless
technology device with Your System
1
Press
BT
ADPT
to switch the receiver to ADAPTER input.
2
Perform the connection operation from the side of the
Bluetooth
wireless technology device to the
Bluetooth
ADAPTER.
•
When the
Bluetooth
ADAPTER is not plugged into the
ADAPTER PORT
terminal,
NO ADP
will be displayed if
ADAPTER
input is selected.
3
Start playback of music contents stored in
Bluetooth
wireless technology device.
This receiver’s remote control buttons can be used for
basic playback of files stored on the
Bluetooth
wireless
technology device.
•
Bluetooth
wireless technology device should be
compatible with AVRCP profile.
•
Depending on
Bluetooth
wireless technology device
you use, operation may differ from what is shown in
the remote control buttons.
4
While listening to a source, press
RECEIVER
then press
ADV
repeatedly to select S.R AIR.
The
Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by PIONEER HOME ELECTRONICS CORPORATION is
under license. Other trademarks and trade names are those
of their respective owners.
Note
•
With this receiver, when an iPod is connected or
disconnected while the music of a
Bluetooth
wireless
technology device is playing, the connection with the
Bluetooth
wireless technology device may be canceled.
Fav
RETURN
HOME
MENU
BAND
PTY
