Pioneer Elite SC-LX704 Instruction Manual Download Page 5

Page: 5 / 225

≫

≫

≫

≫

≫

≫

What’s in the box

1. Main unit (1)

Remote controller (RC-977R) (1), Batteries (AAA/R03) (2)

3. Speaker setup microphone (1)

•

Used during Initial Setup.

4. Indoor FM antenna (1)

5. AM loop antenna (1)

6. Power cord (1)

•

Initial Setup Guide (1)

* This document is an online instruction manual. It is not included as an

accessory.

• Connect speakers with an impedance of 4 Ω to 16 Ω.

• The power cord must be connected only after all other connections are

completed.

• We will not accept any responsibility for damage arising from the connection

with equipment manufactured by other companies.

• Network services and content that can be used may no longer be available

if new functions are added by updating firmware or the service providers

terminate their services. Also, available services may differ depending on your

area.

• Details on the firmware update will be posted on our website and through

other means at a later date.

• Specifications and appearance are subject to change without prior notice.













Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands