Pioneer Elite SC-LX704 Instruction Manual Download Page 220

Page: 220 / 225

220

≫

≫

≫

≫

≫

≫

About HDMI

Compatible functions

HDMI (High Definition Multimedia Interface) is a digital interface standard for

connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other

video components. Several separate video and audio cables have been required

to connect AV components so far. With HDMI, a single cable can transmit control

signals, digital video and digital audio (2-channel PCM, multichannel digital audio,

and multichannel PCM).

HDMI CEC function:

By connecting a device that complies with CEC (Consumer Electronics Control)

of the HDMI standard using an HDMI cable, a variety of linked operations

between devices are possible. This function enables various linking operations

with players, such as switching input selectors interlocking with a player,

adjusting the volume of this unit using the remote controller of a TV, and

automatically switching this unit to standby when the TV is turned off.

The unit is designed to link with products that comply with the CEC standard,

however, linked operation is not always guaranteed with all CEC devices.

For linked functions to work properly, do not connect CEC-compliant devices

exceeding the connectable number to the HDMI jack as shown below.

• Blu-ray Disc/DVD players: up to 3 units

• Blu-ray Disc/DVD recorders: up to 3 units

• Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner: up to

4 units

Operation has been confirmed on the following devices: (As of January 2019)

Toshiba brand televisions; Sharp brand televisions; Toshiba brand players and

recorders; Sharp brand players and recorders (when used with a Sharp brand

television)
ARC (Audio Return Channel)/eARC (Enhanced Audio Return Channel):

The ARC function and eARC function transmit the audio signals of the TV via an

HDMI cable, and plays the audio of the TV on this unit. By connecting an ARC-

compatible TV or eARC-compatible TV with a single HDMI cable, you can output

the audio and video from this unit to the TV, and also input the audio from the TV

to this unit.

• The eARC function is a newly added function for HDMI 2.1. This is an

expanded function from the existing ARC function, and is able to send audio

formats such as Dolby TrueHD and DTS-HD Master Audio that cannot be sent

with the ARC function, from an eARC-compatible TV to this unit.

–

ARC-supported audio formats: PCM, Dolby Digital, Dolby Digital Plus, DTS

(DTS 96/24, DTS-ES, etc.), DTS-HD High Resolution Audio, IMAX DTS

–

eARC-supported audio formats: PCM, Dolby Digital, Dolby Digital Plus,

DTS (DTS 96/24, DTS-ES, etc.), Dolby TrueHD, Dolby Atmos, DTS-HD

Master Audio, DTS:X, Multichannel PCM, DTS-HD High Resolution Audio,

IMAX DTS, IMAX DTS:X

HDMI Standby Through :

Even if this unit is in standby mode, the input signals from AV components can be

transmitted to the TV.

Deep Color :

By connecting devices supporting Deep Color, video signals input from the

devices can be reproduced on the TV with even more colors.
x.v.Color

™

This technology reproduces even more realistic colors by expanding the color

gamut.

3D :

You can transmit 3D video signals from AV components to the TV.
4K :

This unit supports 4K (3840×2160p) and 4K SMPTE (4096×2160p) video signals.
Lip Sync :

This setting automatically corrects desynchronization between the video and

audio signals based on the information from the HDMI Lip Sync-compatible TV.
Copyright Protection:

The HDMI jack of this unit conforms to the Revision 1.4, Revision 2.2 and

Revision 2.3 standards of the HDCP (High-bandwidth Digital Content Protection),

a copy protection system for digital video signals. Other devices connected to the

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands