Pioneer Elite SC-97 Operating Instructions Manual Download Page 120

Page: 120 / 171

120

The System Setup and Other Setup menus

5 Press Start.

The firmware update prepare screen is displayed. If the screen does not switch automatically, click

Click here

6 Browse the latest firmware on your computer (a) and then press Upload (b).

Firmware files have the extension “fw”. Select a file with the extension “fw”.
The confirmation screen is displayed. If you continue the firmware update, press

. Once the firmware update

process starts, you cannot stop it. Wait until the file is uploaded (about one minute may be required depending
on your LAN connection environment).

7 The firmware upload status screen is displayed.

“

The upload process finished successfully.

” will be shown when the update is completed.

Once updating is completed, the receiver’s power automatically turns off.

Note

This setting for the network has been confirmed for OS X v 10.7 and Safari 5.1.

Summary of Contents for Elite SC-97












































































































































































Search results

Summary of Contents for Elite SC-97

Reviews:

Related manuals for Elite SC-97

Brands by name

Popular brands

Pioneer Elite SC-97, Operating Instructions Manual

Search results

Summary of Contents for Elite SC-97

Reviews:

Related manuals for Elite SC-97

Brands by name

Popular brands