Standing Wave
Use this to display the standing wave related
adjustment values for the various MCACC
memories. See
Standing Wave
on page 72 for
1 Select ‘Standing Wave’ from the
MCACC Data Check menu.
2 When ‘Filter Channel’ is highlighted,
use
i
/
j
to select the channel for which
you want to check standing wave control.
The standing wave related calibration value
for the selected channel stored at the selected
MCACC preset and its graph are displayed.
3 Press
k
to highlight ‘MCACC’, then
use
i
/
j
to select the MCACC preset you
want to check.
Acoustic Cal EQ
Use this to display the calibration values for the
frequency response of the various channels set
in the different MCACC presets. See
Acoustic
Calibration EQ Adjust
on page 72 for more on
this.
1 Select ‘Acoustic Cal EQ’ from the
MCACC Data Check menu.
2 When ‘Ch’ is highlighted, use
i
/
j
to
select the channel.
The calibration value for the frequency response
of the selected channel stored at the selected
MCACC preset and its graph are displayed.
3 Press
k
to highlight ‘MCACC’, then
use
i
/
j
to select the MCACC preset you
want to check.
Group Delay
Use this to display the calibrated speaker group
delay results. See
Better sound using Phase
Control and Full Band Phase Control
on page 45
for more on this.
1 Select ‘Group Delay’ from the
MCACC Data Check menu.
2 When ‘Channel’ is highlighted, use
k
/
l
to select the channel you want to
check.
The result of group delay calibration for the
selected channel is displayed.
When measurements have been per-
formed with
Full Auto MCACC
selected
at
Advanced MCACC
or with
ALL
or
Full Band Phase Ctrl
selected when
Auto MCACC
is selected, the graph before
group delay calibration is also displayed.
When
After
is selected at
Calibration
, the
group delay after calibration is displayed.
Compared to when
Before
is selected, with
After
there is less difference in the delay
between frequency bands and the group delay
between the different channels is uniform,
allowing you to check the full band phase con-
trol effect.
No Data
is displayed if the selected group delay
has not been measured.
En
74
11
The Advanced MCACC menu
Checking MCACC Data
At the procedure of
Automatically conducting
optimum sound tuning (Full Auto MCACC)
on
page 32 , the procedure of
Automatic MCACC
(Expert)
on page 69 or after fine-adjusting at
Manual MCACC setup
on page 71 , you can
check your calibrated settings using the GUI
screen.
1 Press
on the remote control,
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use
i
/
j
/
k
/
l
and
ENTER
to navigate through the screens and
select menu items. Press
RETURN
to exit the
current menu.
2 Select ‘MCACC Data Check’ from the
Home Menu.
3 Select the setting you want to check.
!
Speaker Setting
– Used to check the
settings of the speaker systems. See
Speaker
Setting
on page 74 for more on this.
!
Channel Level
– Used to check the output
level of the different speakers. See
Channel
Level
on page 74 for more on this.
!
Speaker Distance
– Used to check the
distance to the different speakers. See
Speaker Distance
on page 74 for more on this.
!
Standing Wave
– Used to check the
standing wave control filter settings. See
Standing Wave
on page 74 for more on this.
!
Acoustic Cal EQ
– Used to check
the calibration values of the listening
environment’s frequency response. See
Acoustic Cal EQ
on page 74 for more on this.
!
Group Delay
– Used to check the speakers’
group delay (both before and after
calibration). See
Group Delay
on page 74 for
4 Press RETURN to go back to the
MCACC Data Check menu, repeating steps
2 and 3 to check other settings.
5 When you’re finished, press RETURN.
You will return to the
Home Menu
.
Speaker Setting
Use this to display the speaker size and number
of speakers. See
Speaker Setting
on page 77 for
1 Select ‘Speaker Setting’ from the
MCACC Data Check menu.
2 Select the channel you want to check.
Use
i
/
j
to select the channel. The corre-
sponding channel on the layout diagram is
highlighted.
Channel Level
Use this to display the level of the various chan-
nels. See
Channel Level
on page 77 for more
on this.
1 Select ‘Channel Level’ from the
MCACC Data Check menu.
2 When ‘MCACC’ is highlighted, use
k
/
l
to select the MCACC preset you
want to check.
The level of the various channels set at the
selected MCACC preset is displayed. ‘
---
’ is
displayed for channels that are not connected.
Speaker Distance
Use this to display the distance from the dif-
ferent channels to the listening position. See
Speaker Distance
on page 78 for more on this.
1 Select ‘Speaker Distance’ from the
MCACC Data Check menu.
2 When ‘MCACC’ is highlighted, use
k
/
l
to select the MCACC preset you
want to check.
The distance from the various channels set at
the selected MCACC preset is displayed. ‘
---
’ is
displayed for channels that are not connected.
Summary of Contents for Elite SC-55
Page 1: ...SC 57 SC 55 ...
Page 107: ...107 En 13 Additional information ...
