72
SC-27
1
2
3
4
A
B
C
D
E
F
1
2
3
4
The following screen will be displayed.
Click on “Firmware Update.”
Click.
3.
The following steps are to be performed on the PC.
Open Internet Explorer on the PC.
W
hen the A
V
amplifier is directly connected with the PC, enter “http:// 192. 16
8
. 000. 002” in the address box then
press the Enter key.
W
hen the A
V
amplifier is connected via a DHCP router, enter the IP address of the A
V
amplifier you noted in the
address box then press the Enter key.
(1) Enter “http:// ***. ***. ***. *** (IP address of the A
V
amplifier).”
(2) Click on the Update button or press the Enter key.
(1) Set the remote control operation switch to SOURCE (SC-27 only).
(2) Press the HOME MEDIA GALLERY button to set the input function to Home Media Gallery.
(3) Select “Setup,” using the or key, then press E
N
TER.
(4) Select “Information” then press E
N
TER. The version of the network firmware will be displayed.
(5) Change displays, using the or key, to check the “IP Address.”
(6) To return to the Top menu screen, press the Return button twice.
[When the PC and AV amplifier are connected via a DHCP router]
Be sure to confirm and note the IP address.
How to Confirm the IP Address
