![Pioneer EFX-1000 Service Manual Download Page 73](http://html.mh-extra.com/html/pioneer/efx-1000/efx-1000_service-manual_328599073.webp)
EFX-1000
73
5
6
7
8
5
6
7
8
C
D
F
A
B
E
1
Description of the Debug mode
• In Debug mode, a check item is displayed on the BPM COUNTER display, and its parameters are displayed in the
EFFECT TIME display. (Immediately after Debug mode is entered, "B-1" is displayed on the BPM COUNTER display,
and the DPF (BEAT EFFECT DEPTH control) value is displayed in hexadecimal on the EFFECT TIME display.)
• When a digital signal is input, the BYPASS indicator lights.
• Other than the above, operations are the same as in Normal mode.
2
How to change check items in Debug mode
• Each time the BYPASS button is pressed, the next check item is displayed.
• Each time the MIDI START button is pressed, the previous check item is displayed.
2
List of check items in Debug mode
Debug mode : ON
Debug mode : CANCEL
POWER OFF
(Rear panel)
BPM COUNTER
display:
B-1
EFFECT TIME
display:
Parameters
MIDI
START
B
BYPASS
S
The next check
item is displayed.
The previous check
item is displayed.
B - 1
Value of the BEAT EFFECT DEPTH control
B - 2
Value of the BEAT EFFECT CHARACTER control
B - 3
Value of the BEAT EFFECT MIX control
J - 1
Value of the DIGITAL JOG BREAK EFFECT DEPTH control
J - 2
Value of the DIGITAL JOG BREAK EFFECT CHARACTER control
J - 3
Value of the DIGITAL JOG BREAK EFFECT MIX control
0 - 0
Value of the EFFECT-output-level adjustment control
1 - 0
Value of the input-level adjustment control
E - C
Number of errors generated during command communication between the microcomputer and the DSP
L E L
Input level of the left side
L E r
Input level of the right side
d S P
DSP version
U P C
Microcomputer version
J o g
Value of the jog-dial setting (Continue displaying a value in HOLD ON)
BPM COUNTER display
Check items
1. Debug mode
(Rear panel)
POWER ON