DIN Rear-mount
1
Determine the appropriate position
where the holes on the bracket and the
side of the unit match.
2
Tighten two screws on each side.
1
2
3
1
Mounting sleeve
2
Mounting bracket
3
Dashboard or console
Use either truss (5 mm × 8 mm) or flush sur-
face (5 mm × 9 mm) screws, depending on
the bracket screw holes.
Removing the unit
1
Remove the trim ring.
1
1
Trim ring
!
Releasing the front panel allows easier ac-
cess to the trim ring.
!
When reattaching the trim ring, point the
side with the groove down.
2
Insert the supplied extraction keys into
both sides of the unit until they click into
place.
3
Pull the unit out of the dashboard.
Securing the front panel
The front panel can be secured with the sup-
plied screw.
1
1
Screw
Speaker installation
1
1
2
3
Front
1
45°
2
4.3 mm holes (3/16 in. Dia.)
3
f
142 mm (5-5/8 in. Dia.)
En
13
English
Section
03
Installation
