5
English
En
SAFETY INSTRUCTIONS
To ensure your personal safety and to maximize the full operating potential of your Drive, read and follow
these safety precautions:
ENVIRONMENT
- Please do not use the unit at places with much dust, high temperature, or high humidity.
Please use the unit at a place where it is not subjected to vibrations or shocks.
POWER
- Turn off your system and attached hardware devices before installation.
READ INSTRUCTIONS
- Read all safety and operating instructions before the Drive is operated.
RETAIN INSTRUCTIONS
- Retain the safety and operating instructions for future reference.
FOLLOW INSTRUCTIONS
- Follow all operating and use instructions.
HEED WARNINGS
- All warnings must be adhered to.
CLEANING
-
DO NOT
use liquid, aerosol cleaners, or alcohol. Use only a damp cloth to clean the exterior
housing.
WATER AND MOISTURE
-
DO NOT
use this product near water.
POWER SOURCES
- Operate this product from the type of power source indicated on the marking label. If you
are not sure of the type of power available, consult Authorized Pioneer Dealer.
OVERLOADING
-
DO NOT
overload wall outlets and extension cords. Doing so can result in fire or electric
shock.
OBJECT AND LIQUID ENTRY
- Never push objects of any kind into this product. Touching dangerous voltage
points may cause a short resulting in fire or electric shock. Do not spill liquid of any kind on this product.
CONDENSATION
- Moisture will form in the operating section of the product causing performance to be
impaired if it is brought from cool surroundings into a warmer environment. If you are moving the unit to a
location with a warmer temperature, let the product stand for 1-2 hours in the new location before turning it
back on.
SERVICING
- Do not attempt to repair this product yourself. Opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel. (Refer to the enclosed
Service and Support Card.)
÷
Remove dust or lint from the disc with a soft cloth by
wiping from the inside to the outside edge rather than in
a circular motion.
÷
Do not use record-cleaning or anti-static agents as the
solutions may cause damage to a disc.
Always be sure to store your discs in proper DVD-R storage
cases when not in use, and always be sure to check for dirt
or dust on discs (especially on the recording side) before use.
÷
Avoid touching or scratching the signal surface (shiny
side) of the disc.
÷
Hold the disc by the edges or by the center hold and one
edge.
÷
Do not affix paper or labels to the disc.
÷
Discard warped or cracked discs as they may cause
damage to the drive.
÷
Avoid specially shaped discs such as hearts or polygons.
