background image

 

Editing

09

 

94

 

En

 

3

Use the 

 

/

 

 (cursor up/down) buttons to select 

a group for the title, then press ENTER.

 

• You can select one of the four groups, or choose 

 

No 

Group

 

, in which case it will only appear when 

 

All

 

 is 

selected.

 

4

Press RETURN to go back to the Disc Navigator 

menu options, or select another title to change the 
group of.

 

Group Name (Grp Name)

 

Use this command to rename a group.

 

1

Select ‘Grp Name’ from the Disc Navigator menu.

2

Use the 

 

/

 

 (cursor left/right) buttons to select 

the group that you want to name or rename, then 
press ENTER.

3

Input a name for the group.

 

The name can be up to six characters long.

 

4

To finish entering the name, highlight ‘Exit’ and 

press ENTER.

5

Press RETURN to go back to the Disc Navigator 

menu options, or select another group to name.

 

Creating and editing a VR mode Play 
List

 

 

A Play List is a kind of virtual content based on the actual 
(Original) content of the disc. The main advantages of 
this type of editing is that it is non-destructive of the video 
content on the disc, and it allows greater control over 
editing, so that you end up with the content exactly as you 
want it.

 

 Remember

 

• Use the 

 

PLAYLIST

 

 button to switch to the Play List 

edit screen.

• The Play List can contain a maximum of 99 titles.

 

Play

 

 

Use this function to start playback of a title.

 

1

Select ‘Play’ from the Disc Navigator Play List 

menu options.

2

Select the title you want to play, then press 

ENTER.

 

Playback of the title you selected starts.

 

Erase

 

 

This command erases a title only from the Play List. The 
title remains in the Original content and the available 
recording time does not increase.

 

1

Select ‘Erase’ from the Disc Navigator Play List 

menu options.

Group1

Group2

Group3

Group4

No Group

HDD

All

Title 1

21:00 Fri  6/09  Pr 5   LP

Disc Navigator

Lock
Erase All
Grp Name

Chg Group

Divide

HDD

Input Group Name

CAPS
small

OK

Clear

Space

A B C  D E  F  G H  I   J  K L M  .   ,  ?  !
N O P Q R  S T U V W X Y  Z  (  )  :   ;

A A A A A A  Æ 

ç  

E  E  E  E   I   I   I   I  

#

2

      

3     

´   

µ

  ¶  ·       

1                                         

¿   `    

D

 N  O  O O O  O  

ø

  U  U  U  U  Y      

ß $ %

0  1  2  3  4  5  6  7  8  9  

<

  =  

>

      _  &

£      \      §  ¨   ©         ¬  –  ® 

_  

˚

+  –   /  @  [  ¥   ]   ˆ  

÷

  x  

±

  {   |   }  ~  ¡

c

a

o

<<

<<

1

/

4

1

/

2

3

/

4

¸

Group 1

VR mode

VR mode

Play List

1/1

Undo

DVD

1

2

3

4

Disc Navigator

Play

Erase
Ttl Name
Chpt Edit
Erase Sec

DVD Remain
   0h37m(FINE)

12:30 Wed  4/11  Pr 5   LP

VR mode

DVR-04_HDD_UK.book 94 ページ 2004年9月10日 金曜日 午後7時3分

Summary of Contents for DVR-920H













































































































































Reviews: