Getting started
29
En
04
•
Auto-tuning channels
The
Auto Scan
option automatically scans
and sets the channel presets.
•
Downloading channels from your TV
Use the
Download from TV
option to
download all the channels that your TV is
tuned to.
6
Select ‘Auto’ for automatic
time setting, or ‘Manual’ to set the clock
manually.
•
Auto clock setting
Some TV channels broadcast time
signals together with the programme.
This recorder can use these signals to
set the clock automatically.
Set ‘Clock Set CH‘ to the channel
preset number that broadcasts a time
signal, then move the cursor down to
‘Start’ and press ENTER.
The recorder takes a short while to set
the time. After you see that it’s set, select
Next
to proceed.
If the time could not be set
automatically, press
RETURN
to go back
to the previous screen and select
Manual
.
•
Manual clock setting
If no stations in your area are
broadcasting time signals, you can set
the clock manually.
Use the
/
buttons to set your
time zone.
You can set this by selecting a city or a
time relative to GMT.
Press
then use the
/
buttons to
select ‘On’ or ‘Off’ for summer time,
then press ENTER.
Select
On
if you are currently using
summer time.
Set the date (day/month/year) and
time, then press ENTER to make all
the settings.
• Use the
/
buttons to change the
value in the highlighted field.
• Use the
/
buttons to move from one
field to another.
• You can go back to the previous screen
at anytime in the Setup Navigator by
pressing
RETURN
.
Tuning
32/99
Cancel
Downloading
Pr 5
32/99
Cancel
ENTER
k Setting
Line System
er Save
P
Clock Setting
Auto
Manual
Auto
k Setting
Line System
er Save
P
p Navigator
p Navigator
Auto Clock Setting
Date
Time
Clock Set CH
– – / – – / – – – –
– – : – –
P r 1
S t a r t
k Setting
Line System
er Save
P
p Navigator
p Navigator
Auto Clock Setting
Date
Time
Clock Set CH
M O N 0 1 / 0 1 / 2 0 0 7
1 1 : 2 0
P r 1
S t a r t
N e x t
k Setting
Line System
er Save
P
p Navigator
p Navigator
Manual Clock Setting
Time Zone
Summer Time
O f f
England
London
1/2
k Setting
Line System
er Save
P
p Navigator
p Navigator
Manual Clock Setting
Time Zone
Summer Time
O n
England
London
1/2
k Setting
Line System
er Save
P
p Navigator
p Navigator
Manual Clock Setting
Date
Time
Time Zone
Summer Time
O n
England
London
01 /
/
01
00 : 00
2007
MON
2/2
DVR550H_WV_EN.book 29 ページ ２００６年１２月２８日 木曜日 午後４時２１分
Downloaded From Disc-Player.com Pioneer Manuals
31
En
04
2
Highlight ‘Postal Code’.
3
Enter your postal
code.
The system uses your postal code to identify
which TV listings data is correct for the area
in which you live, so it is important that you
enter it correctly.
4
If you are using an external receiver
(such as a satellite receiver) with the
supplied G-LINK cable, complete this
step, otherwise jump to step 5 below.
• See
on
page 18 for more on using the supplied
G-LINK cable.
• Select
External Receiver 1
,
2
or
3
, then
press
ENTER
. (If you have just one
external receiver, use
External Receiver
1
. You can add further receivers in
2
and
3
if you need to.)
After pressing
ENTER
:
• Select your reception method
(
Terrestrial
,
Cable
or
Satellite
).
• Select your provider (if applicable).
• Select the brand of your external
receiver.
• Identify which input your external
receiver is connected to.
After completing these steps the recorder
will try and communicate with your external
receiver and change the channel via the G-
LINK cable. If the channel was successfully
changed, select
Yes
to confirm.
If the channel did not change, select
No
. The
GUIDE Plus+ system will try other codes
assigned to your external receiver. If none of
the codes changes the channel
successfully, tune your external receiver to
the host channel for your country (refer to
step
5
below) and leave it on overnight. The
ENTER
AUDIO
SUBTITLE
REC MODE
ANGLE
PLAY MODE
ENTER
DVR550H_WV_EN.book 31 ページ ２００６年１２月２８日 木曜日 午後４時２１分
Downloaded From Disc-Player.com Pioneer Manuals
33
En
04
• Even if you can’t use the EPG functions
where you live, you can still set VIDEO
Plus+ timer recordings and manual
recordings — see
on page 56.
• The front panel display shows
EPG
when
receiving data. If you power on the
recorder during an EPG download, the
download is cancelled.
• EPG data may be received several times
a day. All updates are automatic.
• When downloading EPG data, the
recorder may sound as though it is on.
This is normal.
Checking the downloaded data the
following day
1
Display the GUIDE Plus+ screen.
You should see a grid filled with channel
logos and TV listings information. Use the
/
buttons to review the list. If you notice
that there are channels missing, or that
there are channels in the list that you don’t
get, go to the Editor screen:
• Press
repeatedly until the Menu bar is
highlighted.
• Press
until
Editor
is highlighted. The
main area of the screen now shows a list
of channels. Those that are turned
ON
are displayed in the grid; those that are
OFF
are hidden. Use the
///
buttons to move down the list and turn
channels
ON
or
OFF
as necessary.
• For any channel that you turn
ON
, the
GUIDE Plus+ system will need to know
how it is received (the source) and on
which programme number. The source
may be the built-in tuner of this recorder,
or an external receiver. The programme
number is the number on which the
channel can be found on its receiving
device/source. The entry in the Editor
screen must match this number for
correct recording of that channel.
• The above is especially important for the
‘host channel’. Please make sure that
the host channel is always switched
ON
.
2
Change the programme
numbers as you like.
Changing the programme numbers allows
you to decide the order in which the
channels change when stepping through
them sequentially. You can do this to group
certain channels together, for example.
3
When you’re done, press the BLUE
Action button (Home) to get back to the
GUIDE Plus+ home screen.
• You can find detailed information on
using the GUIDE Plus+ system in the
following chapter.
GUIDE
AUDIO
SUBTITLE
REC MODE
ANGLE
PLAY MODE
DVR550H_WV_EN.book 33 ページ ２００６年１２月２８日 木曜日 午後４時２１分
Downloaded From Disc-Player.com Pioneer Manuals