DVH-P7000R
A
B
C
D
5
7
8
5
7
8
127
-
Handling the mechanical module
1. The mechanical module should be handled by holding
the upper frame and main frame of the mechanical mod-
ule.
2. The front section of the upper frame is not very sturdy,
-
V
1. Bring the mechanism to a locked position (disk load
standby position).
2. Turn the mechanical module upside down.
3. Set the pick-up flexible cable to a shorted position on
the land end (the other is auxiliary), and turn the SW
.
4. Remove the pick-up flexible cable and the CRG flexible
cable from the connector. Remove the solder on the
.
5. Remove
at three
and remove the
DVD Core Unit V (lift the board in the direction of the
white arrow shown in fig. 9, and remove it out diago-
nally).
-
1. Lift
pick-up rack to
of the axis of the rack,
then press on it lightly, and fix i
2. Remove the screw that keeps the main shaft
p
clam
sp
place, and remove the main shaft clamp spring.
3. Remove the PU unit with the main shaft attached.
D
Short
Auxilia
land
Fig. 7
Fig. 8
Fig. 10
t
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
