Pioneer DVH-P5650MP Operation Manual Download Page 66

Page: 66 / 102

External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.

Using the dynamic range

control

The dynamic range refers to the difference be-

tween the largest and softest sounds. The dy-

namic range control compresses this

difference so that you can clearly hear sounds

even at low volume levels.

The dynamic range control is effective only

on Dolby Digital sounds.

1 Press A to select DRC.

Press

until

DRC

appears in the display.

When playing other than the DVD disc, you

cannot switch this mode.

2 Press

to turn the dynamic range

control on.

DRC :ON

appears in the display. Dynamic

range control is now on.

To turn dynamic range control off, press

Using the direct control

You can override audio settings to check for ef-

fectiveness of your audio settings.

1 Press A to select DIRCT.

Press

until

DIRCT

appears in the display.

2 Press

to turn the direct control on.

DIRCT:ON

appears in the display. Direct con-

trol is now on.

To turn direct control off, press

Notes

All audio functions are locked out during

DIRCT:ON

except

VOLUME

and

If the source is a 2-channel LPCM audio or a
2-channel Dolby Digital audio and you select

DIRCT:ON

, audio is heared only over front

left/right speakers.

Using the down-mix function

Only when the multi-channel processor (e.g.,

DEQ-P7650) is connected to this unit, you can

operate this function.

The down-mix function allows you to play back

multi-channel audio in 2 channels.

1 Press A to select Lo/Ro.

Press

until

Lo/Ro

appears in the display.

If the down mix

Lt/Rt

has been previously se-

lected,

Lt/Rt

will be displayed.

2 Press

to switch the down

mix settings.

Lt/Rt

Down mix so that the surround

components can be restored (decoded).

Lo/Ro

Stereo mix the original audio that

do not contain channel modes such as sur-
round components.

Using the Dolby Pro Logic

Only when the multi-channel processor (e.g.,

DEQ-P7650) is connected to this unit, you can

operate this function.

Dolby Pro Logic

creates five full-bandwidth

output channels from two-channel sources to

achieve high-purity matrix surround.

If both the center and the rear speakers are

set to

OFF

, you cannot use this function.

Digital Signal Processor

Section

Summary of Contents for DVH-P5650MP







































































































Search results

Summary of Contents for DVH-P5650MP

Reviews:

Related manuals for DVH-P5650MP

Brands by name

Popular brands

Pioneer DVH-P5650MP, Operation Manual

Search results

Summary of Contents for DVH-P5650MP

Reviews:

Related manuals for DVH-P5650MP

Brands by name

Popular brands