Changing the level
You can change the set parental lock level.
1
Move the thumb pad up or down to select
PAR-
ENTAL
in
GEN.
2
Click the thumb pad.
Parental lock setting menu is displayed.
3
Press
0
to
9
to input the registered code number.
4
Move the thumb pad left or right to move the cur-
sor to the previous or next position.
5
Click the thumb pad after entering the four digit
code number.
This sets the code number, and the level can now
be changed.
!
If you input an incorrect code number, the
icon
is displayed. Input the correct code
number.
!
If you forget your code number, refer to
6
Move the thumb pad left or right to select the de-
sired level.
7
Click the thumb pad.
The parental lock level is set.
If you forget your code number
Please see the following section, and press
CLEAR
10
times in the parental lock setting menu. Refer to
on this page. The registered code
number is canceled, letting you register a new one.
Setting the DivX subtitle file
You can select whether or not to display DivX external
subtitles.
!
The DivX subtitles will be displayed even when
CUSTOM
is selected if no DivX external subtitle
files exist.
1
Move the thumb pad up or down to select
DivX
SUBTITLE
in
GEN.
2
Click the thumb pad to select whether to display
DivX external subtitles or not.
!
ORIGINAL
–
Display the DivX subtitles
!
CUSTOM
–
Display the DivX external subtitles
Notes
!
Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
!
Up to 126 characters can be displayed on one
screen. If more than 126 characters are set,
the excess characters will not be displayed.
Setting for digital output
Audio which is outputted from digital output of this
unit can be selected. Normally, set to
STREAM
. If this
unit
’
s digital output is not used, there is no need to
change settings.
!
Selecting
Linear PCM
enables you to switch the
output channel if playing dual mono mode DVD
video discs.
1
Move the thumb pad up or down to select
IEC DI-
GITAL OUTPUT
in
GEN.
2
Click the thumb pad to select the desired digital
output setting.
!
STREAM
–
The Dolby Digital/DTS signal is
output as it is (initial setting)
!
Linear PCM
–
The Dolby Digital/DTS signal is
converted to and output as a linear PCM sig-
nal
Displaying the DivX
â
VOD
registration code
In order to play DivX VOD (video on demand) con-
tents on this unit, the unit must first be registered
with a DivX VOD contents provider. For registration,
generate a DivX VOD registration code and submit it
to your provider.
!
Keep a record of the code as you will need it
when you register your unit to the DivX VOD provi-
der.
1
Move the thumb pad up or down to select
DivX
VOD
in
GEN.
2
Click the thumb pad.
3
Move the thumb pad up or down to select
REGIS-
TRATION CODE
.
4
Click the thumb pad.
Your registration code is displayed.
En
26
Section
02
Operating this unit