16
You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time if
the Auto Clock process did not set them correctly.
Example:
Setting the clock to “8:30 AM”, 30th (SAT)
October, 2004.
1
Press
VCR MENU
.
Press
SET +
or
–
to select the
“SYSTEM SETUP” option, then
press
ENTER
.
2
Press
SET +
or
–
to select the
“CLOCK SET” option, then press
ENTER
.
3
Press
SET +
or
–
to set the month,
then press
ENTER
.
4
Set the day, year and time as in
step
3
.
After setting the clock, date and time
starts functioning automatically.
NOTES:
• After a power failure or disconnection of the power plug,
the time display will be lost. In this case, set the present
time again if the Auto Clock did not set correctly.
• To move cursor backward, press
CANCEL
.
1
Press
VCR MENU
.
Press
SET +
or
–
to select the “CH
SETUP” mode, then press
ENTER
.
This DVD/VCR is equipped with a channel memory
feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the DVD/VCR’s memory. In addition to
normal VHF and UHF channels, this DVD/VCR can
receive up to 113 Cable TV channels. To use this DVD/
VCR with an antenna, set the TV/CABLE menu option to
the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.
Tuner setting
TV/CABLE selection
1
Press
VCR MENU
.
Press
SET +
or
–
to select the
“CH SETUP” mode, then press
ENTER
.
2
Press
SET +
or
–
to select the
“ADD/DELETE” mode, then press
ENTER
.
3
Select the desired channel to be
memorized or deleted using
SET
+
or
–
button, or using
Number
keys
.
4
Press
ENTER
to select the “ADD” or “DELETE”.
5
Press
VCR MENU
until the MENU screen is cleared.
To add/delete channels
1
In the “CH SETUP” menu, press
SET +
or
–
to select “AUTO CH
MEMORY”, then press
ENTER
.
2
The DVD/VCR will begin memoriz-
ing all the channels available in
your area.
4
Press
VCR MENU
until the MENU screen is cleared.
2
Press
SET +
or
–
to select the
TV/CABLE mode.
3
Press
ENTER
to select the TV or
CABLE mode.
The arrow indicates the selected
mode.
TV
- VHF/UHF channels
CABLE - CABLE TV channels
Automatic memory tuning
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SETUP
SYSTEM SETUP
〈
+/-/ENTER/MENU
〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON
OFF
ON
OFF
á ñ
á ñ
á ñ
á ñ
á ñ
CH 003
ADD
á+/-/0-9/ENTER/MENUñ
Manual clock setting
You can add the channels you want or delete the chan-
nels you do not want manualy.
Noise elimination
When you don't want to receive a weak signal broad-
cast, the Blue back screen can be obtained by selecting
the NO NOISE BACKGROUND “ON”. When the unit is
shipped from the factory, the NO NOISE BACKGROUND
is set to the “ON”.
1
In the “SYSTEM SETUP” menu,
press
SET +
or
–
to select “ NO
NOISE BACKGROUND”.
2
Press
ENTER
to select the “ON”
position.
3
Press
VCR MENU
until the MENU screen is cleared.
〈
+/-/ENTER/MENU
〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON
OFF
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON
OFF
VRB1362A_10-17.pm6
7/10/04, 16:07
16
