76
DV-535
Rear Panel
WYXJ, WYXJ/SP, WVXJ, and WYXQ Types
1
AV CONNECTOR jack
Use a 21-pin SCART cable to connect to a TV or monitor
compatible with this type of connection. Both audio and video
signals are output from the
AV CONNECTOR
jack.
2
TV SYSTEM switch
Use to change the TV signal mode to either PAL or NTSC
according to the type of TV and disc to be used. When the
switch is in the
AUTO
position, the player outputs the format
on the disc as is.
3
DIGITAL OUT jack (coaxial)
Use to output the digital audio signal recorded on discs. You
can output the digital signal via either coaxial output jack to an
AV amplifier or receiver.
4
DIGITAL OUT jack (optical (OPT.))
Use to output the digital audio signal recorded on discs. You
can output the digital signal via either optical output jack to an
AV amplifier or receiver.
5
CONTROL IN jack
Use to connect this player to another component bearing the
Pioneer
Î
mark. This lets you control this unit as though it
were a component in a system. Player operations are then
performed by pointing the remote control at the component
that the player is connect to.
6
AC IN power cord connection terminal
Use to connect the power cord to the wall outlet.
7
S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-Video jack.
8
VIDEO OUT jack
Connect to the video input on a TV or monitor or AV amplifier
or receiver with video input capability.
9
AUDIO OUT jacks
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier. If you are connecting to a
receiver that has both digital and analog input jacks for DVD
player connection, it may be beneficial to make both
connections.
PAL
AUTO
NTSC
TV SYSTEM
AV CONNECTOR
DIGITAL OUT
AUDIO OUT
VIDEO
OUT
S-VIDEO
OUT
DIGITAL
OUT
OPT
CONTROL
IN
AC IN
L
R
1
2
3
4
5
6
7
8
9
