Pioneer DV-470-K, Service Manual

Page: 48 / 88

DV-470-S
48
1 2 3 4
1 2 3 4
C
D
F
A
B
E
6.5 MECHANISM ADJUSTMENT
• Remove the 03 SD Pickup Assy-S from the Traverse Mecha. Assy.
• Remove the joint and the joint spring of the 03 SD Pickup Assy-S.
• Put the joint between the Tangential (or Radial) adjustment screw and the mechanism base
and turn each screw to adjust the height.
(Refer to "6.1 ADJUSTMENT ITEMS AND LOCATION".)
START
Tangential and Radial Height Coarse Adjustment
1
Note:
Before removing the flexible cable for the
pickup, soldering of the pickup circuit is
necessary.
For details, see "7.1.10 DISASSEMBLY".
• Pass through the guide shaft to a new 03 SD Pickup Assy-S.
• Attach it to the Traverse Mecha. Assy.
• Attach the Traverse Mecha. Assy-S to the 04 LOADER Assy.
• Turn it over and attach the joint and the joint spring.
• Arrange the flexible cables.
(Refer to "7.1.10 DISASSEMBLY".)
7.5mm
Joint
Mechanism base
03 SD Pickup Assy-S
03 SD Pickup Assy-S
Joint
Joint Spring
Guide Shaft