97
DV-444, DV-440
Rear Panel
1
CONTROL IN jack
Use to connect this player to another component
bearing the Pioneer
Î
mark. This lets you control
this unit as though it were a component in a system.
Player operations are then performed by pointing the
remote control at the component that the player is
connect to.
2
COMPONENT VIDEO OUT jacks
If your TV or monitor has component video inputs,
you can produce a higher quality picture on your TV
or monitor by connecting to the component video
outputs on this unit.
3
AUDIO OUT jacks
Use to output two-channel audio (analog) to the
audio stereo inputs on a TV or stereo amplifier. If you
are connecting to a receiver that has both digital and
analog input jacks for DVD player connection, it may
be beneficial to make both connections.
4
AC IN power cord connection terminal
Use to connect the power cord to the wall outlet.
5
S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear
picture reproduction is possible by connecting the
player to your TV or monitor via the S-Video jack.
You can switch between
[S1]
and
[S2]
S-video
output from the Setup menu.
6
VIDEO OUT jack
Connect to the video input on a TV or monitor or AV
amplifier or receiver with video input capability.
7
DIGITAL OUT OPTICAL jack
Use to output the digital audio signal recorded on
discs. You can output the digital signal via the optical
output jack to an AV amplifier or receiver.
8
DIGITAL OUT COAXIAL jack
Use to output the digital audio signal recorded on
discs. You can output the digital signal via the coaxial
output jack to an AV amplifier or receiver.
AC IN
Y
P
B
P
R
VIDEO OUT
COMPONENT
VIDEO OUT
CONTROL
IN
AUDIO OUT
R
L
DIGITAL OUT
OPTICAL
COAXIAL
S
1
2
3
4
8
7
6
5
