background image

- 4 -

En
g

lis

h

Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the 
performance of any of the vehicle’s operating systems or safety features, including air 
bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the 
vehicle.

Please remember to fasten your seat belt at all times while operating your vehicle. If 
you are ever in an accident, your injuries can be considerably more severe if your seat 
belt is not properly buckled.

Never use headphones while driving.

 WARNING

• LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND 

MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE HANDBRAKE SWITCH. IMPROPER 
CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN 
SERIOUS INJURY OR DAMAGE.

• Do not take any steps to tamper with or disable the handbrake interlock system which is in 

place for your protection. Tampering with or disabling the handbrake interlock system could 
result in serious injury or death.

• To avoid the risk of damage and injury and the potential violation of applicable laws, this 

product is not for use with a video image that is visible to the driver.

In some countries the viewing of video image on a display inside a vehicle even by persons other 
than the driver may be illegal. Where such regulations apply, they must be obeyed.

If you attempt to watch video image while driving, the warning 

“Viewing of front seat 

video source while driving is strictly prohibited.”

 will appear on the screen. To watch 

video image on this display, stop the vehicle in a safe place and apply the handbrake. 
Please keep the brake pedal pushed down before releasing the handbrake.

The video output terminal (

V OUT

) is for connection of a display to enable passengers in 

the rear seats to watch video images.

 WARNING

NEVER install the rear display in a location that enables the driver to watch video images while driving.

Be sure to run the vehicle engine while using this product. Using this product without 
running the engine can drain the battery.

 WARNING

Do not install this product in a vehicle that does not have an ACC wire or circuitry available.

To ensure safe driving

When using a display connected to V OUT

To avoid battery exhaustion

Summary of Contents for DMH-A1350BT
























































































Reviews: