En
32
Changing the settings of this unit in the utilities mode
Launching utilities mode
!
The [
TAP
] button functions as the [
SHIFT
] button in the utilities
mode. Also, the [
SAMPLER FX ON
] and [
AUX FX ON
] buttons func-
tion as the [
BEAT
c
,
d
] buttons.
1 Press the [PANEL/UTILITY] button for over 1 second.
The [
UTILITY
] mode setting screen appears.
2 Press the [BEAT
c
,
d
] button.
Select the setting item.
3 Press the [SHIFT] button.
The screen switches to the setting item’s setting value change screen.
4 Press the [BEAT
c
,
d
] button.
Change the setting value.
5 Press the [SHIFT] button.
Enter the setting value.
The previous screen reappears.
!
To return to the previous screen without changing the settings, press
the [
PANEL
/
UTILITY
] button.
6 Press the [PANEL/UTILITY] button.
The [
UTILITY
] mode setting screen closes.
About the auto standby function
When [
AUTO STANDBY
] is set to [
ON
], the unit automatically enters
the standby mode if 10 hours elapses with all of the following conditions
met.
—
That none of this unit’s buttons or controls are operated.
—
That no audio signals of
–10 dB
or greater are input to this
unit’s input terminals.
!
If the [
PANEL
/
UTILITY
] button is pressed, the standby mode is
canceled.
!
This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [
AUTO STANDBY
]
to [
OFF
].
About the talk over function
The talk over function has the two modes described below.
—
[
ADV
] (advanced talk over): The mid-range of the sound of chan-
nels other than the [
MIC
] channel is attenuated according to the
[
TALKOVER LEVEL
] setting value and output.
dB
Frequency
—
[
NORMAL
] (normal talk over): The sound of channels other than the
[
MIC
] channel is attenuated according to the [
TALKOVER LEVEL
]
setting value and output.
dB
Frequency
Setting preferences
*: Setting upon purchase
Options
settings
Screen display
Setting value
Descriptions
AUTO STANDBY
ON
/
OFF
ON
Turns the auto standby mode on and off.
MIC TALKOVER
ADV
/
NORMAL
ADVANCED
Sets the microphone talk-over mode.
TALKOVER LEVEL –6 dB
,
–12 dB
,
–18 dB
*,
–24 dB
–18 dB
Sets the talk-over level applied when the talk-over function is turned on.
MIC LOW CUT
ON
/
OFF
ON
Turns the low cut filter on and off for microphone.
MIC TO BOOTH
ON
/
OFF
ON
Sets whether to mix the microphone sound with the sound output from the
[
BOOTH
] terminal.
MIC LIMITER
ON
/
OFF
ON
Turns the peak limiter on and off for the sound input to the [
MIC
] terminal.
MASTER LIMITER
ON
/
OFF
ON
Turns the peak limiter on and off for the sound output from the [
MASTER
]
terminal.
BOOTH ATT.
0 dB
,
–6 dB
,
–12 dB
0 dB
Sets the attenuation level of the sound output from the [
BOOTH
] terminal.
MASTER OUT
mono
/
stereo
stereo
Switches the sound output from the [
MASTER 1
] and [
MASTER 2
] terminals
between monaural and stereo.
BOOTH OUT
mono
/
stereo
stereo
Switches the sound output from the [
BOOTH
] terminal between monaural
and stereo.
LED BRIGHTNESS
1
-
3
1
Sets the brightness of the LED and OLED displays (the larger value is
brighter)
Factory Reset
CANCEL
/
reset
CANCEL
Restores all the settings to their factory defaults.
1
Note that the output sound may be distorted even if the master level indicator does not light up to the very top.
