6
En
b
EQ/ISO (HI, MID, LOW) controls (page 6)
These adjust the sound quality of the respective channels.
c
CUE button (page 6)
Presses the [
CUE
] button(s) for the channel(s) you want to monitor.
d
Channel Fader (page 6)
Adjusts the level of audio signals output in each channel.
e
CROSS FADER ASSIGN (A, THRU, B) selector switch
(page 6)
Sets the output destination of each channel to [
A
] or [
B
].
f
Crossfader (page 6)
Outputs audio signals assigned by the crossfader assign switch cor-
responding to the curve characteristics selected by [
CROSS FADER
]
(Crossfader Curve Selector Switch).
g
MASTER LEVEL control (page 6)
Adjusts the audio level output from the [
MASTER1
] and [
MASTER2
]
terminals.
h
Master Level Indicator (page 6)
Displays the audio level output from the [
MASTER1
] and [
MASTER2
]
terminals.
i
MONO, STEREO selector switch (page 7)
Switches the sound output from the [
MASTER1
] terminals, etc.,
between monaural and stereo.
j
BOOTH MONITOR control (page 7)
Adjusts the level of audio signals output from the [
BOOTH
] terminal.
k
EQ CURVE (ISOLATOR, EQ) selector switch (page 6)
Switches the function of the [
EQ/ISO
(
HI
,
MID
,
LOW
)] controls.
l
CH FADER ( , ) selector switch (page 7)
Switches the channel fader’s curve characteristics.
m
CROSS FADER ( , , ) selector switch (page 7)
This switches the crossfader curve characteristics.
n
Main unit display
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.
Basic Operation
Outputting sound
1 Press [POWER] button.
Turn on the power of this unit.
2 Switch the input selector switches.
Selects the input sources for the different channels from among the
devices connected to this unit.
—
[
PHONO
]: Selects the analog player connected to the [
PHONO
]
terminals.
—
[
CD/LINE
], [
LINE
]: Selects the DJ player or cassette deck con-
nected to the [
CD/LINE
] or [
LINE
] terminals.
—
[
USB */*
]: Selects the sound of the computer connected to the
[
USB
] port.
3 Turn the [TRIM] control.
Adjusts the level of audio signals input in each channel.
The corresponding channel level indicator lights when audio signals are
being properly input to that channel.
4 Move the channel fader away from you.
Adjusts the level of audio signals output in each channel.
5 Switch the [CROSS FADER ASSIGN (A, THRU, B)]
selector switch.
Switches the output destination of each channel.
—
[
A
]: Assigns to [
A
] (left) of the crossfader.
—
[
B
]: Assigns to [
B
] (right) of the crossfader.
—
[
THRU
]: Selects this when you do not want to use the crossfader.
(The signals do not pass through the crossfader.)
6 Set the crossfader.
This operation is not necessary when the [
CROSS FADER ASSIGN
(
A
,
THRU
,
B
)] selector switch is set to [
THRU
].
7 Turn the [MASTER LEVEL] control.
Audio signals are output from the [
MASTER1
] and [
MASTER2
]
terminals.
The master level indicator lights.
Adjusting the sound quality
Turn the [EQ/ISO (HI, MID, LOW)] controls for the
respective channels.
The adjustable ranges for the respective controls are as shown below.
!
HI
: –26 dB to +6 dB (13 kHz)
!
MID
: –26 dB to +6 dB (1 kHz)
!
LOW
: –26 dB to +6 dB (70 Hz)
Switching the function of the [
EQ/ISO
(
HI
,
MID
,
LOW
)] controls
Switch the [EQ CURVE (ISOLATOR, EQ)] selector switch.
—
[
ISOLATOR
]: Functions as an isolator.
—
[
EQ
]: The equalizer function is set.
Monitoring sound with headphones
1 Connect headphones to the [PHONES] terminal.
2 Press the [CUE] button(s) for the channel(s) you want
to monitor.
3 Switch the [MONO SPLIT, STEREO] selector switch.
—
[
MONO SPLIT
]: The sound of the channels for which the [
CUE
]
button is pressed is output from the headphones output’s left
channel, the [
MASTER
] channel sound is output from the right
channel.
—
[
STEREO
]: The sound of the channels for which the [
CUE
] button
is pressed is output from the headphones in stereo.
