DJM-400
88
1
2
3
4
1
2
3
4
C
D
F
A
B
E
8. PANEL FACILITIES
8.1 CONNECTION PANEL SECTION
Rear panel
Front panel
1. POWER switch
2. STEREO/MONO selector switch
When switch is set to the [
MONO
] position, master output is in
monaural.
3. MIC2/AUX(R) input connector
∅
6.3 mm phone-type input connector. Use for microphone input, or
for right (R) channel of component with line level output.
4. MIC/AUX input selector switch
When this switch is set to [
AUX
], the
MIC1
and
MIC2
input
connectors
function as
AUX (L)
and
AUX (R)
input connectors.
5. MIC1/AUX(L) input connector
∅
6.3 mm phone-type input connector. Use for microphone input, or
for left (L) channel of component with line level output.
6. Signal grounding terminal (SIGNAL GND)
Use to connect ground wires from analog players.
This is not a safety grounding terminal.
7. Channel 1 CONTROL connector
∅
3.5 mm mini-phone type connector. Connect to control connector
of the DJ CD player connected to channel 1 inputs.
When this connection is made, the DJ mixer's fader lever can be
used to perform fader start play and back cue on the channel 1 DJ
CD player.
8. Channel 1 CD input connectors (CD)
RCA type line level input connectors.
Use to connect a DJ CD player or other component with line level
output.
9. Channel 1 PHONO/LINE input connectors
RCA type phono level (for MM cartridge) or line level input
connectors.
Select function using channel 1 PHONO/LINE selector switch.
10. Channel 1 PHONO/LINE selector switch
Use to select function of channel 1
PHONO/LINE
input connectors.
11. Channel 2 CONTROL connector
∅
3.5 mm mini-phone type connector. Connect to control connector
of the DJ CD player connected to channel 2 inputs.
When this connection is made, the DJ mixer's fader lever can be
used to perform fader start play and back cue on the channel 2 DJ
CD player.
12. Channel 2 CD input connectors (CD)
RCA type line level input connectors.
Use to connect a DJ CD player or other component with line level
output.
13. Channel 2 PHONO/LINE input connectors
RCA type phono level (for MM cartridge) or line level input
connectors.
Select function using channel
2 PHONO/LINE
selector switch.
14. Channel 2 PHONO/LINE selector switch
Use to select function of channel
2 PHONO/LINE
input connectors.
15. MASTER OUT 2 output connectors
RCA type unbalanced output.
16. MASTER OUT 1 output connectors
RCA type unbalanced output.
17. Power inlet (AC IN)
Use the accessory power cord to connect to an AC power outlet of
the proper voltage.
18. Headphones jack (PHONES)
Use to connect stereo headphones equipped with
∅
6.3 mm stereo
headphones plug.
