5
MIDI
The MIDI feature in Serato DJ Pro provides the ability to remap Serato DJ Pro software functions to your
primary Serato controller, interface or mixer. You can also assign controls to a secondary MIDI controller to
further enhance your performance.
For more information on MIDI mapping with Serato DJ Pro click here
To remap your supported Serato device, open the SETUP screen and click the MIDI tab. If your Serato
device supports hardware remapping, it will show up in the MIDI Devices list at the top.
Select your connected device from the MIDI Devices list and make sure the “Allow Serato Hardware
Remapping” option is checked.
Once checked, the MIDI assign button at the top of the screen will become available for you to start
remapping.
You can save, edit or delete MIDI presets in the MIDI tab of the SETUP screen. Clicking ‘Restore Defaults’
will erase any custom mappings for all connected devices and revert their functions back to default.
DJ-FX
The DJ-FX in Serato DJ Pro are powered by iZotope™. Click the FX button to open the FX
panel. Select either 1, 2, or M to assign the selected effect bank to a deck or the master output.
There are two available modes with DJ-FX. Single FX Mode allows you to select one effect per FX bank, and
has multiple parameters that can be adjusted. Multi FX Mode allows you to select up to three effects per
FX bank, and adjust only one parameter, the FX Depth. The same effects available in Single FX mode are
available in Multi FX mode, as well some additional presets.
You can select between the two FX modes by clicking either the Single FX mode button or Multi FX
mode button - and the DDJ-REV1 controls (per FX unit) are as follows:
DDJ-REV1
Control
Single FX mode
SHIFT function
Multi FX mode
SHIFT function
1
Arm FX Slot (hold with Slot select
drop-down open, while turning
Browse knob to cycle FX)
FX Select drop-down
Arm FX Slot 1 (hold with Slot select drop-
down open, while turning Browse knob to
cycle FX)
FX Select drop-down
2
-
Beats multiplier
decrease
Arm FX Slot 2 (hold with Slot select drop-
down open, while turning Browse knob to
cycle FX)
Beats multiplier
decrease
3
-
Beats multiplier
increase
Arm FX Slot 3 (hold with Slot select drop-
down open, while turning Browse knob to
cycle FX)
Beats multiplier
increase
LEVEL/DEPTH
Increase FX level/depth
-
Increase FX level/depth (all slots)
-