1 Press AUDIO and hold until FRONT ap-
pears in the display, then press AUDIO to
select T TONE.
After
FRONT
is displayed, press
AUDIO
until
T TONE
appears in the display.
2 Press
d
to start the test tone output.
The test tone is outputted. It rotates from
speaker to speaker in the following sequence
at intervals of about two seconds. The current
settings for the speaker over which you hear
the test tone are shown in the display.
FRT-L
(front speaker left)
CENT
(center
speaker)
FRT-R
(front speaker right)
RER-R
(rear speaker right)
RER-L
(rear speaker left)
SUB.W
(subwoofer)
#
Check each speaker output level. If no adjust-
ments are needed, perform step 4 to stop the test
tone.
#
The settings do not appear for speakers
whose size is set
OFF
.
3 Press
a
or
b
to adjust the speaker out-
put level.
Each press of
a
or
b
increases or decreases
the speaker output level.
+10
10
is dis-
played as the level is increased or decreased.
#
The test tone rotates to the next speaker after
about two seconds from the last operation.
4 Press
c
to stop the test tone output.
5 Press BAND/ESC to return to the play-
back display.
Notes
!
If needed, select speakers and adjust their
ab-
solute
output levels. (Refer to
Adjusting the
speaker output levels
on the previous page.)
!
To adjust the speaker output levels in this
mode is the same as making the speaker out-
put levels at
FRT-L
. Both provide the same re-
sults.
Using the time alignment
The time alignment lets you adjust the dis-
tance between each speaker and the listening
position.
Selecting the time alignment
adjustment mode
This function cannot be operated when DVH-
P7050, DVH-P5050MP or AVH-P6550DVD is con-
nected to this unit.
You can select the time alignment adjustment
mode.
1 Press AUDIO repeatedly until INITIAL
appears in the display.
#
You cannot select
INITIAL
when neither
F/L
nor
F/R
is selected in
POSI
.
2 Press
c
or
d
to select the time align-
ment.
!
INITIAL
Initial time alignment (factory set-
ting)
!
CUSTOM
Adjusted time alignment that
you can create for yourself
!
AUTO TA
Time alignment created by auto
TA and EQ. (Refer to
Auto TA and EQ (auto-
time alignment and auto-equalizing)
on the
next page.)
!
OFF
Turn the time alignment off
#
To turn time alignment off, select
TA :OFF
.
#
You cannot select
AUTO TA
if auto TA and EQ
has not been carried out.
#
You cannot select
ADJUSTMENT
when
neither
F/L
nor
F/R
is selected in
POSI
.
3 Press BAND/ESC to cancel the time
alignment mode.
Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
Digital Signal Processor
En
13
English
Section
03
