Pioneer DEH-X8580BT, Owner'S Manual

Page: 45 / 68

You can tune in to a station using PTY (program
type) information.
1
Turn LEVER left or right to select the desired
setting.
News&Inf
—
Popular
—
Classics
—
Others
2
Press M.C. to begin the search.
The unit searches for a station broadcasting
that type of program. When a station is found,
its program service name is displayed.
PTY (program type ID code) information is
listed in the following section. Refer to
PTY list
on the previous page.
To cancel the search, press
M.C. again.
The program of some stations may differ from
that indicated by the transmitted PTY.
If no station is broadcasting the type of pro-
gram you searched for,
Not found
is displayed
for about two seconds and then the tuner re-
turns to the original station.
Traffic Announce (traffic announcement standby)
1
Press M.C. to turn traffic announcement
standby on or off.
Alternative FREQ (alternative frequencies search)
When the tuner cannot get a good reception, the
unit automatically searches for a different station
in the same network.
1
Press M.C. to turn the alternative frequencies
search on or off.
News interrupt (news program interruption)
1
Press M.C. to turn the NEWS function on or
off.
Tuning Mode (LEVER tuning setting)
You can assign a function to the
LEVER
on the
unit.
Select
Manual (manual tuning) to tune up or
down manually or select Preset (preset channel)
to switch between preset channels.
1
Press
M.C.
to select
Manual
or
Preset
.
CD/CD-R/CD-RW and external
storage devices (USB, SD)
Basic operations
7 5 6 4
3 2 1
1
Bit rate/sampling frequency indicator
Shows the bit rate or sampling frequency of
the current track (file) when the compressed
audio is playing.
!
When playing back VBR (variable bit
rate)-recorded AAC files, the average bit
rate value is displayed. However, depend-
ing on the software used to decode AAC
files,
VBR may be displayed.
2
Folder number indicator
Shows the current folder number when play-
ing a compressed audio file.
3
Track number indicator
4
PLAY / PAUSE indicator
5
S.Rtrv indicator
Appears when Sound Retriever function is
on.
6
Song time (progress bar)
7
Play time indicator
Playing a CD/CD-R/CD-RW
1
Insert the disc into the disc loading slot with
the label side up.
Ejecting a CD/CD-R/CD-RW
1
Press
h
(eject).
Playing songs on a USB storage device
1
Use a Pioneer USB cable to connect the USB
storage device to the unit.
!
Plug in the USB storage device using the USB
cable.
Stopping playback of files on a USB storage de-
vice
!
You may disconnect the USB storage device at
any time.
Playing songs on an SD memory card
1
Remove the front panel.
2
Insert an SD memory card into the SD card
slot.
Insert it with the contact surface facing down,
and press on the card until it clicks and com-
pletely locks into place.
3
Re-attach the front panel.
4
Press SRC / OFF to select SD as the source.
Playback will start.
Stopping playback of files on an SD memory card
1
Remove the front panel.
2
Press on the SD memory card until it clicks.
The SD memory card is ejected.
3
Pull out the SD memory card.
4
Re-attach the front panel.
Selecting a folder
1
Press or .
Selecting a track
1
Turn LEVER .
Fast forwarding or reversing
1
Turn and hold down LEVER to the right or left.
Returning to root folder
1
Press and hold BAND / .
Switching between compressed audio and CD-DA
1
Press BAND / .
Switching between playback memory devices
You can switch between playback memory devices
on USB storage devices with more than one Mass
Storage Device-compatible memory device.
1
Press BAND / .
!
You can switch between up to 32 different
memory devices.
Notes
!
When playing compressed audio, there is no
sound during fast forward or reverse.
!
Disconnect USB storage devices from the
unit when not in use.
Operations using the MIXTRAX
button
Turning MIXTRAX on or off
You can use this function when
USB or SD is se-
lected as the source.
1
Press MIX / DISP OFF to turn MIXTRAX on or
off.
!
For more details about MIXTRAX, refer to
About MIXTRAX on page 17.
!
For more details about MIXTRAX functions,
refer to
MIXTRAX menu on page 17.
Switching the display
Selecting the desired text information
%
Press /DISP.
Notes
!
Depending on the version of iTunes used to
write MP3 files to a disc or media file types,
incompatible text stored within an audio file
may be displayed incorrectly.
!
Text information items that can be changed
depend on the media.
Selecting and playing files/
tracks from the name list
This function is available when OFF is selected
in Music browse . For details, refer to
Music browse (music browse) on page 18.
1 Press (list) to switch to the file/track
name list mode.
English
Using this unit
9
Section
Using this unit
En
02