Pioneer DEH-X7600HD, Owner'S Manual

Page: 12 / 112

Black plate (12,1)
Using the Bluetooth telephone
Important
!
Leaving the unit on standby to connect to
your phone via Bluetooth while the engine is
not running can drain the battery.
!
Operations may vary depending on the kind
of cellular phone.
!
Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Be sure to park your vehicle in
a safe place and apply the parking brake be-
fore proceeding.
Setting up for hands-free phoning
1
Connection
Use the Bluetooth telephone connection
menu. Refer to
Connection menu operation on
page 12.
2
Function settings
Use the Bluetooth telephone function menu.
Refer to
Phone menu operation on page 13.
Basic operations
Making a phone call
Refer to
Phone menu operation on page 13.
Answering an incoming call
1
When a call is received, press .
Ending a call
1
Press .
Rejecting an incoming call
1
When a call is received, press and hold .
Answering a call waiting
1
When a call is received, press .
Switching between callers on hold
1
Press M.C.
Canceling call waiting
1
Press and hold .
Adjusting the other party
’
s listening volume
1
Turn LEVER while talking on the phone.
!
When private mode is on, this function is not
available.
Turning private mode on or off
1
Press BAND / while talking on the phone.
Note
If private mode is selected on the cellular phone,
hands-free phoning may not be available.
Using voice recognition
This feature can be used on an iPhone equipped
with voice recognition that is connected by
Bluetooth.
1 Press and hold M.C. to switch to voice
recognition mode.
2 Press M.C. and then talk into the micro-
phone to input voice commands.
To end voice recognition mode, press BAND / .
Notes
!
For details on voice recognition features,
check the manual for your iPhone.
!
In order for your voice commands to be rec-
ognized and interpreted correctly, ensure
that conditions are suitable for recognition.
!
Please note that wind blowing through the
vehicle windows and noise coming from out-
side the vehicle can interfere with voice com-
mand operation.
!
For optimum pick-up, the microphone should
be placed directly in front of the driver at a
suitable distance.
!
Speaking too soon after the start of the com-
mand may cause voice recognition to fail.
!
Speak slowly, deliberately, and clearly.
Connection menu operation
Important
Connected devices may not work properly if
more than one Bluetooth device is connected at
a time (e.g. a phone and a separate audio player
are connected simultaneously).
1 Press and hold to display the connec-
tion menu.
#
You cannot perform this step during a call.
2 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
Device list
(connecting or disconnecting a device
from the device list)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the name of a device you
want to connect/disconnect.
!
Press and hold
M.C.
to swap between the
Bluetooth device address and the device
name.
3
Press M.C. to connect/disconnect the selected
device.
Once the connection is established,
Con-
nected is displayed.
!
When no device is selected in the device list,
this function is not available.
Delete device (deleting a device from the device
list)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the name of a device you
want to delete.
!
Press and hold M.C. to swap between the
Bluetooth device address and the device
name.
3
Press M.C. to display Delete YES .
4
Press
M.C.
to delete the device information
from the device list.
!
When no device is selected in the device list,
this function is not available.
!
While this function is in use, do not turn off
the engine.
Add device (connecting a new device)
Using this unit
12
Section
Using this unit
En
02
<QRD3228-A>12