Pioneer DEH-X7500SD, Operating Manual

Page: 20 / 44

Delete device
(deleting a device from the device list)
!
When no device is selected in the device list, this
function is not available.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the name of a device you want
to delete.
!
Press and hold M.C. to swap between the
Bluetooth device address and the device
name.
3
Press M.C. to display Delete YES .
4
Press
M.C.
to delete the device information from
the device list.
!
While this function is in use, do not turn off the
engine.
Add device (connecting a new device)
1
Press M.C. to start searching.
!
To cancel, press M.C. while searching.
!
If this unit fails to find any available cellular
phones,
Not found is displayed.
2
Turn M.C. to select a device from the device list.
!
Press and hold M.C. to swap between the
Bluetooth device address and the device
name.
3
Press
M.C.
to connect the selected device.
!
To complete the connection, check the device
name (
Pioneer BT Unit ). Enter the PIN code
on your device if necessary.
!
PIN code is set to 0000 as the default. You
can change this code.
!
6-digit number appears on the display of this
unit. Once the connection is established, this
number disappears.
!
If you are unable to complete the connection
using this unit, use the device to connect to
the unit.
!
If three devices are already paired,
Device Full
is displayed and it is not possible to perform
this operation. In this case, delete a paired de-
vice first.
Auto connect (connecting to a Bluetooth device
automatically)
1
Press M.C. to turn automatic connection on or
off.
Visibility (setting the visibility of this unit)
Bluetooth visibility can be turned on so that other de-
vices can discover the unit.
1
Press M.C. to turn the visibility of this unit on or
off.
Pin code input (PIN code input)
You must enter a PIN code on your device to confirm
the Bluetooth connection. The default code is
0000 ,
but you can change it with this function.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select a number.
3
Press M.C. to move the cursor to the next posi-
tion.
4
After inputting PIN code, press and hold M.C.
!
After inputting, pressing M.C. returns you to
the PIN code input display, and you can
change the PIN code.
Device INFO (Bluetooth device address display)
1
Press M.C. to display the setting mode.
2
Press
M.C.
to select the desired setting.
Device name
—
Bluetooth device address
Phone menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1 Press to display the phone menu.
2 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
Missed calls (missed call history)
Dialed calls (dialed call history)
Received calls
(received call history)
1
Press
M.C.
to display the phone number list.
2
Turn M.C. to select a name or phone number.
3
Press
M.C.
to make a call.
!
To display details about the contact you selected,
press and hold
M.C.
PhoneBook (phone book)
En
20
Section
02
Using this unit