21
En
En
g
lis
h
PARENTAL CTRL
[LOCKED CH], [CLEAR ALL], [EDIT
CODE]
Input the current passcode on the [PASSCODE]
screen (the default passcode is 0000).
1
Turn the
M.C.
dial to select a number.
2
Press the
M.C.
dial to move the cursor to the
next position.
3
After inputting the passcode, press the
M.C.
dial.
4
Turn the
M.C.
dial to select one of the
following menu items, then press to confirm.
•
[LOCKED CH]: Lock the current channel, which
contains mature content.
1
Press the
M.C.
dial to turn the lock on or off.
•
[CLEAR ALL]: Unlock all the channels that have
restricted access.
1
Turn the
M.C.
dial to switch to [YES], then
press to confirm.
•
[EDIT CODE]: Change the passcode.
1
Repeat steps 1 to 3 to enter a new passcode.
2
After inputting the passcode, press the
M.C.
dial.
The new passcode is saved.
AUDIO settings
Menu Item
Description
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL], [CUSTOM1],
[CUSTOM2], [FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band:
[50HZ] to
[12.5kHZ]
Equalizer level:
[–6] to [+6]
Select or customize the equalizer curve.
•
When you select a setting other than
[CUSTOM1] and [CUSTOM2], you can also
customize the equalizer curve by pressing and
holding the
M.C.
dial, then store the
customized equalizer curve in [CUSTOM1].
FADER
*1 (Only for standard mode)
Adjust the front and rear speaker balance.
BALANCE
Adjust the left and right speaker balance.
Menu Item
Description
SUBWOOFER
[ON], [OFF]
Set to [ON] when using a subwoofer speaker.
SUBWOOFER
*2
[NOR], [REV]
Select the subwoofer phase.
SPEAKER LEVEL
Network mode:
[HIGH L], [HIGH
R], [MID L], [MID R], [SUBWOOFER]
Standard mode:
[FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Output level:
[–24] to [10]
Select a speaker unit (filter) and adjust the
output level.
•
Each value you have adjusted changes when
you change the [POSITION] setting (page 21).
CROSSOVER
Select a speaker unit (filter) to adjust the HPF or
LPF cut-off frequency and the slope for each
speaker unit.
For details on the [CROSSOVER] setting, see
page 17.
POSITION
[OFF], [FRONT LEFT] (front seat
left), [FRONT RIGHT] (front seat
right), [FRONT] (front seats), [ALL]*
* Only for standard mode
Select a listening position to adjust the speakers'
output levels automatically and add a delay time
that corresponds to the number and locations of
occupied seats.
TIME ALGNMNT
[INITIAL], [ATA], [OFF], [CUSTOM]
Select a type of speaker and
adjust the speaker distance for
further customizing in [CUSTOM].
Network mode:
[HIGH L], [HIGH
R], [MID L], [MID R], [SUBWOOFER]
Standard mode:
[FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Speaker distance (inch):
[140] to
[0]
Select or customize the time alignment settings
to reflect the distance between the listener’s
position and each speaker.
•
Select [INITIAL] to initialize the setting value.
•
Select [ATA] to reflect the results of [AUTO TA &
EQ] in the setting value. [ATA] can only be
selected, if auto TA and EQ has already been
performed (page 18).
•
Select [OFF] to reset all setting values to 0.
•
The [CUSTOM] setting is available when
[FRONT LEFT] or [FRONT RIGHT] is selected in
[POSITION] (page 21).
•
The [CUSTOM] setting is not available when
[OFF] is selected in [SUBWOOFER] (page 21).
Menu Item
Description
