7
En
En
g
lis
h
*1 Compressed audio files only
*2 This function is disabled when USB is selected as a source and the MIXTRAX function is on.
*3 When you use the fast forward or reverse function while playing a VBR file, the playback time may
be not correct.
Search for a file from a list
1
Press
to display the list.
2
Turn the
M.C.
dial to select the desired
file (folder) name or category, then press
to confirm.
3
Turn the
M.C.
dial to select the desired
file, then press to confirm.
Playback starts.
View a list of the files in the selected folder/
category*1
Press the
M.C.
dial when a folder/category
is selected.
Play a song in the selected folder/
category*1
Press and hold the
M.C.
dial when a folder/
category is selected.
Alphabetical search (iPod only)
1
Press
to display the list.
2
Turn the
M.C.
dial to select the desired
category list, then press
to enter the
alphabetical search mode.
(Turning the
M.C.
dial twice also enters
the alphabetical search mode.)
3
Turn the
M.C.
dial to select a letter, then
press to display the alphabetical list.
To cancel alphabetical search, press
BAND
/
.
Repeat play
Press
6
/
.
Random/shuffle play
Press
5
/
.
Shuffle all play (iPod only)
Press and hold
5
/
.
Pause/resume playback
Press
4
/
PAUSE
.
Sound retriever*1*2
Press
3
/
S.Rtrv
.
[1]: Effective for low compression rates
[2]: Effective for high compression rates
Return to root folder (CD/USB only)*1
Press and hold
.
Switch between compressed audio and CD-
DA (CD only)
Press
BAND
/
.
Change drives in USB device
(Devices that support the USB mass storage
device class protocol only)
Press
BAND
/
.
Purpose
Operation
Link play mode
You can access songs based on the artist, album, or genre currently playing.
1
While listening to a song, press and hold
to enter the link play mode.
2
Turn the
M.C.
dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to
confirm.
The selected song/album will be played after the currently playing song.
NOTE
The selected song/album may be canceled if you use functions other than those from the link play
mode (e.g. fast forward and reverse).
iPod control
You can control the unit via a connected iPod.
The following iPod models are not compatible with this function.
– iPod nano 1st generation, iPod with video
1
Press
BAND
/
during playback, then select the control mode.
[
CONTROL iPod
]: The unit’s iPod function can be operated from the connected iPod.
[
CONTROL AUDIO
]: The unit’s iPod function can only be operated by the buttons on
the unit or supplied remote control. In this mode, the connected iPod cannot be
turned on or off.
NOTES
•
Switching the control mode to [CONTROL iPod] pauses song playback. Use the connected iPod to
resume playback.
•
The following operations are still accessible from the unit, even if the control mode is set to
[CONTROL iPod].
– Pause, fast forward/reverse, song/chapter selection
•
The volume can only be adjusted from the unit.
The MIXTRAX function creates a non-stop mix of your music library, accompanied by
illumination effects. For details on MIXTRAX settings, see page 12.
NOTES
•
This function is not compatible with an Android device connected via MTP.
•
When USB is selected as a source and the MIXTRAX function is in use, the sound retriever function is
disabled.
•
Depending on the file/song, sound effects may not be available.
•
Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.
Useful functions for iPod
About MIXTRAX (USB/iPod only)
