Pioneer DEH-X16UB, Owner'S Manual

Page: 7 / 48

Black plate (7,1)
Audio adjustments
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
Once selected, the following audio functions
can be adjusted.
!
FADER
is not available when
SUB.W/SUB.W
is selected in SP-P/O MODE . For details, refer
to SP-P/O MODE (rear output and preout set-
ting) on page 8.
!
SUB.W and SUB.W CTRL are not available
when
REAR/REAR
is selected in
SP-P/O MODE . For details, refer to
SP-P/O MODE (rear output and preout set-
ting) on page 8.
!
SUB.W CTRL is not available when SUB.W is
selected in
OFF
. For details, refer to
SUB.W
(subwoofer on/off setting) on page 7.
!
SLA is not available when FM is selected as
the source.
FADER (fader adjustment)
1
Press M.C. to display the setting mode.
2
Turn M.C. to adjust the front/rear speaker bal-
ance.
BALANCE (balance adjustment)
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to adjust the left/right speaker bal-
ance.
EQ SETTING (equalizer recall)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the equalizer.
POWERFUL
—
NATURAL
—
VOCAL
—
CUS-
TOM1
—
CUSTOM2
—
FLAT
—
SUPER BASS
The equalizer band and equalizer level can be
customized when
CUSTOM1 or CUSTOM2 is
selected.
If selecting
CUSTOM1
or
CUSTOM2
, complete
the procedures outlined below. If selecting
other options, press
M.C. to return to the pre-
vious display.
!
CUSTOM1 can be set separately for each
source.
!
CUSTOM2 is a shared setting used in com-
mon for all sources.
3
Press M.C. to display the setting mode.
4
Press M.C. to cycle between the following:
Equalizer band
—
Equalizer level
5
Turn M.C. to select the desired setting.
Equalizer band: 80HZ
—
250HZ
—
800HZ
—
2.5KHZ
—
8KHZ
Equalizer level: +6 to
–
6
!
You can also switch the equalizer by pressing
EQ repeatedly.
LOUDNESS
(loudness)
Loudness compensates for deficiencies in the low-
frequency and high-frequency ranges at low vol-
ume.
1
Press M.C. to select the desired setting.
OFF (off)
—
LOW (low)
—
MID (mid)
—
HI (high)
SUB.W (subwoofer on/off setting)
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Press M.C. to select the desired setting.
NOR (normal phase)
—
REV (reverse phase)
—
OFF
(subwoofer off)
SUB.W CTRL (subwoofer adjustment)
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
1
Press M.C. to display the setting mode.
2
Press M.C. to cycle between the following:
Cut-off frequency
—
Output level
—
Slope level
Rates that can be adjusted will flash.
3
Turn M.C. to select the desired setting.
Cut-off frequency: 50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
—
160HZ
—
200HZ
Output level:
–
24 to +6
Slope level:
–
12
— –
24
BASS BOOST (bass boost)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select a desired level.
0 to +6 is displayed as the level is increased or
decreased.
HPF SETTING (high pass filter adjustment)
Use this function when wanting to listen only to
high-frequency sounds. Only frequencies higher
than the high-pass filter (HPF) cutoff are output
from the speakers.
1
Press M.C. to display the setting mode.
2
Press M.C. to cycle between the following:
Cut-off frequency
—
Slope level
3
Turn M.C. to select the desired setting.
Cut-off frequency:
OFF
—
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
—
160HZ
—
200HZ
Slope level:
–
12
— –
24
SLA (source level adjustment)
This function prevents the volume from changing
too dramatically when the source switches.
!
Settings are based on the FM volume level,
which remains unchanged.
!
The AM volume level can also be adjusted with
this function.
1
Press M.C. to display the setting mode.
2
Turn M.C. to adjust the source volume.
Adjustment range: +4 to
–
4
System menu
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select SYSTEM.
3 Turn M.C. to select the system menu
function.
Once selected, the following system menu func-
tions can be adjusted.
CLOCK SET (setting the clock)
1
Press M.C. to display the setting mode.
2
Press
M.C.
to select the segment of the clock
display you wish to set.
Hour
—
Minute
3
Turn M.C. to adjust the clock.
12H/24H (time notation)
1
Press M.C. to select the desired setting.
12H
(12-hour clock)
—
24H
(24-hour clock)
AUX (auxiliary input)
Activate this setting when using an auxiliary de-
vice connected to this unit.
1
Press
M.C.
to turn
AUX
on or off.
DIMMER (dimmer)
1
Press M.C. to turn the dimmer on or off.
!
You can also change the dimmer setting by
pressing and holding
/ DIMMER .
About MIXTRAX
MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing you
to experience your music as a nonstop mix com-
plete with visual effects.
English
Using this unit
7
Section
Using this unit
En
02
<QRD3205-A>7